Search results

Let me start by saying I love my blaster, enough power and it looks good. My problem is its just to small. I can get bar risers and taller bars, but I'm 6feet, and my little Blaster is just too small. Is there a taller seat or any way to make it larger?

Took me here. http://www.ebay.com/itm/like/281184701700

Thanks. I guess banshee upgrade is in the future

What other quads use the same lug pattern as the Blaster?

I know this is old, but the link up there goes to eBay.

Have a blaster. Going to change the reeds to Byesen reeds. When searching for them, i noticed reed cage spacers. Should i get a spacer too? Also can get a Keinin 34mm carb cheap. Will that fit the boots? And wif I should do the spacer, and the Keinin fits the intake, what mods will i have to do...

Thanks, turns out after removing all the tors junk, I needed to connect the 2 wires in the harness going to the carb. Thanks again, john

Have a 92 blaster with an engine from a 88. Yesterday it was running, but the idle was acting up. I took the twist throttle and carb from the 88 today, removed the tors carb, thumb throttle and unplugged tors box, now I have no spark. I need help, supposed to ride tomorrow! John in Vegas

I bought a pipie off of ebay-ok thats just great. I put it up to my machine (88) and its different. Stock goes to the right, mine goes to the left and around to the right. Since the motors are practically the same for all years, is there the chance I bought the wrong year? BTW its just the...

sorry, it just took forever to load it. Thanks for the link.

that link isnt working for me.

Thanks. Just wanted to make sure I got the correct grips. I actually thought I had a pair for my bike but now I cant find them, John in Vegas

I dont know anything about these quads,my Blaster is my first, just got it. Anyway, I need grips. It came with a twist throttle. Can I use my dirtbike grips or do i need special grips? Thanks, John in Vegas

I got one for mine a couple weeks ago a buck cheaper but $20 shipping. However mine is the 6 pack holder. Seems alright to me, its an AC Racing. John in Vegas

Congrats on finishing!

All this swap talk makes me want to swap in my air cooled CR500. I wont, but one can always dream... Good luck with the swap. John in Vegas

Id just get a JEEP, but thats just me. John in Vegas

Ive got an 06 and love it, and its plated too. Only thing bad is the 4 stroke thing. John in Vegas

just remember to move the part of the bead you have on already to the "dish" of the rim, dont keep it on the bead part of the rim. John in Vegas

if the piston was touching the bore, you would have problems. Dont forget, air cooled engines have bigger tolerances than water cooled. John in vegas