Search results

  1. sborns

    Looking For LT250R Motor!!!!!in Nebraska or SouthDakota

    what is your location. i have a guy in SWMN that has 250r and zilla parts. i think he has a 92 250 engine and a possible roller. that or he a has a zilla engine for a wicked hybrid
  2. sborns

    Exhaust power valve...i was thinking about making one that...

    how does FTZ do it then? they make powervale 250R honda engines. i think their 370 is a powervalve engine. http://www.ftzracing.com/PowerValveMtr.htm
  3. sborns

    lowering kit ?

    i been thinking of drilling and tapping the blocks to be able to bolt them to a plate on the bottom of the a arm making it more solid. but still is the issue of the bottom of the quad smashing into the ground. any way you cut it jumping on a lowered quad is just going to be a bad time. what is...
  4. sborns

    lowering kit ?

    i agree the 2 inches may be a stretch but it is bit of a shock for how much it actualy does widen out. it would be nice to see a easy lowering kit for the same money but if it would fit tighter in the a arm without the slack when the suspension is topped out.
  5. sborns

    lowering kit ?

    when you lower it it changes the angle of the a arm to flat out increasing width. try pushing down on your front end and notice how wide your quad is with the a arms flat out.
  6. sborns

    lowering kit ?

    the extra slack in the lowering kit is enough to really bust up the front end. we run that setup on event horizon's flat track quad but after a season of TT they are beat up and the a arms are starting to show some beating from em. if you keep in on the ground you wont have a problem. mudrunner...
  7. sborns

    does this seem legit?

    browsing ebay for parts for a go ped im working on and i came across a couple of these ads from this guy. the man is a master he has figured out exactly how to get real performance. lol Zenoah Go Ped Dual Boost Bottle Kit R C King Motor Titan R C Hobbypro H6 | eBay
  8. sborns

    might have a trade in the works

    id say pull the trigger. i have been trying to find one around here in half decent shape to cafe. strip it down to bare bones and street legal. no better feeling when carving down nice turns with a cafe. ton up!
  9. sborns

    GMC wins Again

    great run for a gm. its hard for them to plant serious power with the IFS. dont get me wrong im a gm guy but ill take a cummins for a serious puller. straight six torque and solid front axle!
  10. sborns

    What all do I need to start tt/flattrack racing

    if you are flat tracking you need to space it out a bit. the quad i race with is at 48" on the rear. a front sway bar is a lifesaver on a good sticky track. and just start off with a 14/40 and possibly grab a 39T rear depending on the size of track. with our 18" tires we are topped out with a...
  11. sborns

    Any sd riders here??

    got three riders in SESD
  12. sborns

    flat track tires?

    they are the cheapest your going to find but not going to be real competitive with them. the tires i run are 160 a piece. american racer is fairly cheap and a good tire.
  13. sborns

    WTF !!!!??????

    2.5L S-10 with 6" stack.... your move.
  14. sborns

    last race of the year. oops..

    well in that case were going to be keeping a closer eye on it next season. see if i cant somehow but an hour meter on the thing. thanks for the input guys. now to see if ken can possibly squeese a little more out of this cylinder!I:I
  15. sborns

    last race of the year. oops..

    one ring gone. the other im working on peeling out as i type. im thinking that the locating dowl is set to far in the piston and not holding the rig in place.
  16. sborns

    last race of the year. oops..

    32:1 yamalube 2r plug chop i couldnet tell you i wasnt involved in tuning or the build. i was away at school. locating dowls look to be recessed way in the back of the ring groove. wiesco. 100-200 hours? flattrack so wide open turn left.
  17. sborns

    last race of the year. oops..

    the piston was a 67.25 and cylinder i just measured at 67.30.
  18. sborns

    last race of the year. oops..

    not too bad actually. it moved material from the exhaust port into the cylinder but it shouldn't take too much to get cleaned up.
  19. sborns

    last race of the year. oops..

    well what gets me is the top rig spun from the pin and got caught on the exhaust port. and sorry bout the photo size i tried to get them smaller but couldn't for some reason.
  20. sborns

    last race of the year. oops..

    ran real well this year with the old yb quad now my buddies. threw on the o'connor YB killa cylinder and this happened on the last practice of the last race of the year. the one thing i cant explain is the carbon on top of the piston. but here is the damage. intake side exhaust side...