Search results

  1. rgpannell

    carb cap and cable

    Does any one know where I can order a carb cap and cable for 34mm pj
  2. rgpannell

    ok tired of messing with it

    Sooo I've bout had my belly full messing with this keihin 34mm pj. I can't get it to idle at all. So I'm thinking about going with a 34mm mikuni so I don't have to change my intake and all. Could anyone give a recommendation to what carb exactly and what jetting to start off at. I'm running a...
  3. rgpannell

    need help 34mm pj no idle

    Ok guys so I got back to work on my build. Just for the background my motor was completely redone by ken occonor , I am running a 34mm pj , my problem is I have to choke to start, when I do it runs high rev till I shut off choke, when I do I have to blip throttle to keep it running. It has...
  4. rgpannell

    need help

    Hey guys its been too long, but I'm back at the blaster ok so here's the prob. I got a motor built by ken oconnor ( did a great job) and I'm running a 34mm keihn carb. 45 pilot 155 main dgh needle. I have to choke it to get it to start and when it does it runs wide open when I push the choke in...
  5. rgpannell

    Well finally gettin my pics up!

    Here is a few pics of my build on my 95 blaster. I will list in more detail when I get finished!
  6. rgpannell

    Help with cfm air box

    Ok I got my cfm air box installed but when I went to hook it up to the carb no go. I am running a 34mm pj carb. Its like the pipe is too short and it needs to come up but it cant because it hits the frame any body had this prob and/or know how to fix it?
  7. rgpannell

    throttle cable prob!

    Hey guys I know yall get tired of carb probs but I searched and searched but couldnt find an answer. My prob is I got a keihin 34mm pj carb off a friend of mine. he had it on his 250r I hooked it up on my stock thumb throttle using his cable because it is like crimped on at the cap on the carb...
  8. rgpannell

    Need tires

    Hey guys (and gals) I need some tires badly I got stock rims. Right now I got 22-11-8 on the rear lol I would like to go with like a 20 on the rear as far as the front goes I don't even know whats on there but I do know they r worn out. So if anybodys got any let me know! Thanks!
  9. rgpannell

    where to buy jets????

    Hey guys I need jets. I got a 34mm keihin pj carb I need to buy jets for. I want true keihin jets anybody got any suggestions where to get them? rep will be given.
  10. rgpannell

    How Ken Oconnor racing makes perfume out of pig sh*t!

    Like my title says Ken turned my pile of sh*t into a masterpiece! I will post some before pics for yall later itll blow ya mind or atleast it did mine! Ken Oconnor racing thats where its at!
  11. rgpannell

    ? about this months botm contest!

    I am just curious about something so I thought I would ask. Last night I checked the botm thread and it showed blonder blaster had 16 and 79bronco had 16 too now this morning I get up and the poll is closed and shows blonder with 12 and bronco with 18 how does that happen how do u lose votes...
  12. rgpannell

    oil pump?

    ok so my blasty I'm rebuilding has had the oil blocked off and I pre mix. my question is the previous owner did the block off but he left the pump (the white gear inside the crankcase) in there. I am just wondering if this needs to be removed or will it hurt anything It seems to be running ok
  13. rgpannell

    clutch probs

    my clutch does nothing lol I know its all put together right push lever in correct, clutch assymbled right got 2 push rods and the steel ball. But its like it has no pressure and when I pull it it makes no change. The torsion spring on the push lever is broke but a couple weeks ago a guy told...
  14. rgpannell

    Help! No idle!

    ok so I finally got my motor back in my blasty and everything hooked back up. With a little throttle it fires right up. It revs up just like it should. But it will not idle at all if I let completly off the throttle it dies. I tried adjusting the air mixture screw didnt seem to change anything.
  15. rgpannell

    bump?

    alright I know I ain't exactly up to date with all the computer lingo, but would someone tell me what "bump" means.
  16. rgpannell

    no spark stator?

    Ok so the blasty I'm working on has no spark. I replaced the 2 "coils" in the stator but I'm not sure I got them soldered right. does any one have a diagram or a picture or what wires go where? My clymer manual doesnt show it.
  17. rgpannell

    Spark plug wire help!!!

    AIght so some how when I was tearing my blasty down to get ready to paint the frame I tore the plug cap off the wire. I know the wire is made to the coil but u can replace the cap so I'm wondering if I can fix mine I got like 4 little wires coming out of the coil wire then on the inside of the...
  18. rgpannell

    polish plastic?

    On my 1995 blasty that I am rebuilding, the platic is in good shape, but it has a bunch of minor scratches. Anyone got any advice on how to make em dissappear?
  19. rgpannell

    supporting member?????

    Hey guys I want to become a supporting member but not sure how sooooo.... if u want my money tell me how lol j/j but seriously tell me
  20. rgpannell

    torsion spring problem!?!?!

    ok the torsion spring on the clutch lever assy. is my prob. The "notch" on the motor case where the end of the spring hooks is broke off. so the spring just spins all the way to the side. Thus it has no tension to pull back the lever. I cut a piece off and bent it so it would catch further up...