Search results

Hello, I'm looking for a straight, preferably wider than stock rear axle for my 1999 Blaster. Thank you in advance.

Thank you once again for helping me with this thing. One more thing I forgot to mention is that after riding for a bit, the idle hangs for 15 seconds or so. The bike did respond well to raising the needle clip up a nitch, could I be compensating for something by doing this? The bike was pressure...

What do you guys think of this plug chop? Sorry, I broke the electrode, but I saved just enough. The top was white. I’m have a bit of a stumble right before the power band at 3/4 to full throttle. I’ve got a 280 main in it now and needle clip one up from middle position. It was stumbling at low...

Do you happen to have the inner clutch hub, and possibly a flywheel?

I have to ask a total noob question. In the video, he stated to have the piston at the bottom, I have been doing it while at tope dead center. Which is correct? I am pretty new at this.

There are a few pics of one on the forum. Basically, one can be made very easily using a metal valve stem. gauge for gas use, some PVC pieces, and an expandable expansion plug. Having access to a leak down tester is an absolute must with 2 strokes. If it will help you, I can post a pic of mine.

I got the videos via USPS. I agree! Worth every penny. I've sent him some engine parts. I can't wait to get them back all nice and shiny. :)

On Friday I purchased the Blaster assembly videos from Ken O’Connor racing. Does anyone know how they are delivered to me? I was thinking I would get a link to see them, but maybe some discs are on the way??? I emailed, but didn’t get a response. I’m not impatient or anything, I just would like...

Do any of you think that that crankshaft might be fine to use in its condition? Not sure what that plastic does on there. I think the main issue was the pretty significant play around the rod bearing. The piston slid back and forth quite a lot

I am looking for a good running, non-knocking, decent compression engine. I recently bought one only to find out that it had a pretty significant issue. Please, no junk. :) Let me know what you have and a price. Thank you

It does indeed have a blue plastic ring. I did not notice any type of spacer, and the head looked stock to me anyway. I just bought this engine from Ebay, and have had a hell of a time figuring out the odd noises, and rough running of this thing. I did contact the seller that I purchased the...

I pulled it apart. Anyone have any idea what the hell happened to my crankshaft.??

Okay, I've done everything I could, and made things better in one aspect, but...... The rough running a low throttle while going slow has now been accompanied by an increasingly getting louder knock. Can anyone think of something with the engine that would make it jump/buck/run rough at low...

Also noticed turning the air screw in beyond 1.5 turns slowly kills the motor, however turning the air screw out beyond 2 turns makes little if any difference. Could this mean something? The air jet is stock, needle clip in the middle. Thank you so much for helping me with this. This atv is...

Awk, a question for you. You mention a needle jet. All I see is the main jet, the washer that I just received. the needle with the clip to adjust, but nothing else.... Where exactly ids the needle jet located? is it the brass piece that seems to be pressed into the center of the carb that the...

Thank you both for your responses! After reading your suggestions I have discovered that the washer under the main jet is in fact missing. I have no idea if this alone would cause my issue, but it is a good place to start. To answer a few of your questions.... The spark plug cap was recently...

Hi! My son recently got a 99 Blaster. It has a Pro Circuit full pipe, Vforce 4 reed assy, pre-mix, 155lbs compression, airbox lid removed, K&N air filter, timing advanced, 93 octane 32:1, jetted with a 290 main, and plug chop looks great with the help of some amazing people on this forum. My...

I actually have a video of the piping sound. You can hear it right as he winds out the gear and starts to slow. Thank you! I didn’t even think of the boot.

Blaster sound

Thank you so much for responding. The only thing I can say about how it runs now, is that it pulls incredibly strong, but I did just notice a popping sound at the very top end as he winds it completely out. Is that normal? Sorry for the noob questions. This is my first experience with a blaster.