Search results

Does anyone know where I can get some replacement flywheel rotor magnets for a 99 blaster? No luck browsing online and no local options. Flywheel still in good shape but the magnets are busted. Also, are any of the magnets I have still salvageable? Picture below.

Hey, I have a oil leak coming from where the cylinder meets the crankcase. Wondering if I could use some yamabond or JBweld to fix it? It’s a very small crack where the two crankcases meet. Here’s a picture of it, any help would be great!

Fixed the problem! Clutch damper and narrow friction plate were in the wrong place. The guy put the clutch damper first in the stack and the narrow friction plate at the very top of the stack.

Okay, finally fixed the exhaust manifold, ran 3 heat cycles. Re-torqued all the head bolts. There is no more leaks or white smoke coming out of the top end. Everything top end wise, looks and works great. Starts up first kick and sounds awesome. Quad will still not move or engage into drive...

I believe it is stripped where it goes into the aluminum head, because when I thread it in and then unthread it, there is metal shavings stuck in the threads of the stud.

I have the Haynes Yamaha blaster Atv owners workshop manual, and I already did one heat cycle and retorqued all of the nuts. I know where it is leaking from already, It is coming from the exhaust port because the studs in the exhaust flange are stripped and will not tighten down so there is a...

Hey, so I took the top end apart replaced all the gaskets and inspected everything. All parts look good no damage inside. Found out where it was leaking and why. So the dummy who did the work stripped out the stud that hooks up the exhaust flange to the exhaust port. So the exhaust flange was...

I gave the “mechanic” 600 dollars in parts for a top and bottom end rebuild. Along with 700 dollars in cash to buy new cases, because he told me mine were cracked. And gave him a 200$ down payment for labor. He told me it would be done in a couple weeks, here we are 7months later and he didn’t...

Haha, sorry boss. I was busy and frustrated. Was just typing my thoughts as they came without caring about grammar.

Sounds good, I will get a good set of gaskets. And once I get it all on will post again

After further inspection, and leak down task, got a major oil leak from head gasket, gonna take top end off and put in new gasket/check for cracks wondering if that will fix the problems...

Hello, I have a 1999 Yamaha blaster that just received a new top and bottom rebuild. New piston, cylinder head, crankshaft, bearings, transmission, clutches/basket, and new gaskets/jettings for the carb.Everything is jetted correctly and put back together, it has new transmission oil. A buddy...

Gotcha! Just around the ignition coil? Or the whole frame across?

Where would I need to sand down? Not exactly sure what you mean

Still waiting for parts! But got it all cleaned and pretty now! Here’s pictures of if you wanted to see hehe now if I can just get the thing to run we will be golden! Before and after pictures!

Haha thanks! I have to save up some more money for the crankshaft and some tools I will need before I can open the bad boy up but I definitely will Post as soon as I get into it. For now time to paint the plastics and clean up the frame and give that some new paint!

Sounds pretty complicated LOL. Thank you for all the help I’m sure this will be a FUN experience haha.

Also here’s the crankshaft kit I was going to buy once I get more money, will I need anything else? Or will these two kits be all I need to get it repaired and running? So I just split the case in two take out the old shaft and replace it with this kit? Then seal the halves back up and then...

I got a weisco top end kit from eBay for about 200 bucks! I was going to get the weisco crankshaft I think it’s 200 bucks as well to match it, it comes with all the gaskets and parts to install it. Here’s a picture of it

I premix 32:1 with ams-oil dominator 2 stroke engine oil, I’m not sure exactly what crankshaft is in there I bought the quad about 2 years ago from Facebook market. Whoever had it before me did a lot of aftermarket stuff to it. Not sure what though. I haven’t done any work to the engine since I...