Search results

  1. B

    No power in gear just puts

    i have a 1989 blaster tors removed just replaced the reeds plug and cleaned the carb but takes a minute to kick over and once running its good in neutral but it barely gets through gears going super slow and has no power any idea to what it could be
  2. B

    will run great then wont start again after a few

    have a 1989 yamaha blaster thats bored .2 over with a weisco piston, boyeson power reeds, stock expansion chamber, aftermarket pipe dont know the brand sticker was burnt, oil injection, aftermarket airfilter no airboxlid, currently running a 250 mainjet, needle clip is set on third in the middle...
  3. B

    Carb tor removal screw setting

    have a 1989 yamaha blaster thats bored .2 over with a weisco piston, boyeson power reeds, stock expansion chamber, aftermarket pipe dont know the brand sticker was burnt, oil injection, aftermarket airfilter no airboxlid, currently running a 250 mainjet, needle clip is set on third in the middle...
  4. B

    Tors removed new idle screw adjusment

    My blaster bogs rn at the moment should i screw it in more or out
  5. B

    Crank seal replacement help needed please and thank you

    im replacing the right side clutch crank seals what is the best way to go about it? do i need to crack the case? a few buddies said id need to but i havent seen anyone talking about on any of the forums i looked up. but any help and suggestions to remove and put the new ones in is greatly...
  6. B

    Smoking like crazy

    I have a 1989 yamaha blaster thats bored .2 over with a weisco piston, boyeson power reeds, stock expansion chamber, aftermarket pipe dont know the brand sticker was burnt, oil injection, aftermarket airfilter no airbox lid, currently running a 250 mainjet, needle clip is set on third in the...
  7. B

    Clutch stopped working please help

    i have a 1989 blaster the clutch stopped working a day ago the bike runs fine starts up first or second kick but when i pull in the clutch it makes an awful noise and wont engage all the way and pops as soon as you release it making it impossible to get out of first to ride the bike Any ideas to...
  8. B

    Clutch problems please help

    i have a 1989 blaster the clutch stopped working a day ago the bike runs fine starts up first or second kick but when i pull in the clutch it makes an awful noise and wont engage all the way and pops as soon as you release it making it impossible to get out of first to ride the bike Any ideas to...
  9. B

    Clutch problems please help

    i have a 1989 blaster the clutch stopped working a day ago the bike runs fine starts up first or second kick but when i pull in the clutch it makes an awful noise and wont engage all the way and pops as soon as you release it making it impossible to get out of first to ride the bike Any ideas to...
  10. B

    Clutch stopped working need help please

    i have a 1989 blaster the clutch stopped working a day ago the bike runs fine starts up first or second kick but when i pull in the clutch it makes an awful noise and wont engage all the way and pops as soon as you release it making it impossible to get out of first to ride the bike Any ideas to...
  11. B

    Clutch stopped working need help

    i have a 1989 blaster the clutch stopped working a day ago the bike runs fine starts up first or second kick but when i pull in the clutch it makes an awful noise and wont engage all the way and pops as soon as you release it making it impossible to get out of first to ride the bike Any ideas to...
  12. B

    1989 blaster w/ few mods jetting

    I have a 1989 yamaha blaster thats bored .2 over with a weisco piston and boyeson power reeds stock expansion chamber aftermarket pipe dont know the brand sticker was burnt oil injection aftermarket airfilter no airbox lid tors unplugged i am currently running a 300 mainjet if i open it all the...
  13. B

    What size mainjet for 89 blaster with few mods

    i have a 1989 yamaha blaster thats bored .2 over with a weisco piston and boyeson power reeds stock headpipe aftermarket pipe dont know the brand sticker was burnt oil injection aftermarket airfilter no airbox lid i am currently running a 300 mainjet if i open it all the way up it will backfire...
  14. B

    What size jet should i run and where should my needle clip be

    i have a stock oem mikuni carb with the tors ontop i have it unplugged but it runs like sh*t it recently started leaking gas the float must be dirty and im pretty sure the clip on the needle is in the wrong position i was wondering if i should try to fix and get tors elimination kit or buy a new...
  15. B

    Best place in michigan for tune and check ups

    Looking for sonewhere that could run though my bike diagnose any problems for a reasonable price From what i know ive heard the tors should have already been removed if yoh have a twist throttle which i do on my 89 blaster but it still there. recently i was trying to tune my bike so I decided...
  16. B

    Blaster seat staple size and misc

    what size staples do you use for a stock yamaha blaster seat and also i have a 89 blaser and from what ive heard the tors should have already been removed but it still there. recently i was trying to tune my bike so I decided to mess the idle screw on top of tors. i ended up stripping it and...
  17. B

    Jetting tors needle postion float position carb setting

    What jet should i run in the stock carb for summer and winter and what should the needle be set at for stick setting as long with the floats and i have a 1989 blaster the tors is stripped and no longer works in order to bypass to i just unplug the tors wires from under the hood and carb i have a...
  18. B

    1989 blaster tor problems questions and help

    I have a 1989 yamaha blaster with a twist throttle and from what ive heard the tors should have already been removed but it still there. recently i was trying to tune my bike so I decided to mess the idle screw on top of tors. i ended up stripping it and then it ran like crap it would high rev...
  19. B

    89 blaster tors question

    will an 89 blaster run with the tors wires unplugged or do you have to cut and cross the wires my blaster was running great untill i messed with the screw untop of the tors one day and i ended up stripping it Before it stopped running the throttle would give it little to no power barely making...