Search results

I have been doing loads of research on here as well as YouTube. I want to modify my head as per Torroidal for the low down torque as well as the rpm limiter(which I still don't understand how it can limit it but still researching still). The only post I found for the dimensions are for the HEMI...

And the finished product.... BEFORE AFTER

Busy refurbing one of my Blasters and trying to remove the spring/coil for around 5 days now with out spending money on it. Finally used my straps for securing my Quad on a trailer and... VOILA!!! LOL Sharing is caring and a picture tells a 1000 words. Now I can paint this mofo in peace with...

That is crazy. Seeing that I never race my quads LOL.

I know one should do a Compression Test and once it gets below around 100PSi, start planning to replace the rings. The compression Tester I have is not the proper one for the Bikes. It has the none return valve at the gauge side and not on the plug fitting thread side which means the readings...

Thanks for confirming. WHat I was thinking too. Hence I never did what the guy in the YouTube vid said to do. Didn't make sense.

That is exactly what I am doing. I have 3 blasters. 2 have been fixed up and busy with the 3rd.

Yes @EvsBlaster. I can do it without this trick but it's always a mission. The cable ties makes it so much simpler and effective. Adding that extra hand you need to keep the spring.

Nope, I do all work on my bikes myself. This one, however, I bought and the previous owner did the work. Good question though. Think I will touch base with him and ask who did the honing/boring of the cylinder. Out of the six, one is missing, front right. Bike has no mods, except for the...

So I have watched a YouTube vid a while back where the guy mentioned how to install this plate that secures the needle. It didn't make sense to me and I have done it in the opposite way he suggested. I need clarity please. YELLOW arrow indicating the plate. BLUE arrow indicating the hole. The...

So, with me tuning my Blasters a lol lately, thought I'd share my easy way of managing this spring for which one never have enough hands to manage. This is probly not something new but I am sure it will help a few. Picture says a thousand words, here goes 2000.

Nope. It's really small. More like a resonance when revving high. I am really not the expert but I don't know why the screaming on top revs and slight vibration gives me a feeling the engine is running lean. with the 67mm Piston added and no other mods, I have upped the Main Jet from 230 to...

Thanks @Larry's Shee and @Blaaster .

So I am finishing my 3rd Blaster and this one feels really strong with nice clean revving except for the Vibration when revving past around 1/2 throttle. Stock Exhaust 230 main jet. Previous owner installed 67mm Piston when the motor seized a year ago. This Blaster really feels strong in the...

Thanks @Larry's Shee .

It's not a long hill as such, it's actually dunes. I believe of which the highest would be around 60-70ft and declining around 15 degrees. So it's up and down etc. Modifications range from full FMF on one bike to stock to oversized piston on the other. All aimed to be tuned slightly rich. I do...

Thanks @Larry's Shee . When I ride I am aware of the above so coming down hill the throttle will be blipped every 2 or 3 seconds. I never freewheel will clutch in for long. Reason for my question is, if my kids and their friends use the Blasters, they obviously do not know any better. SO I just...

So what happens or what's the down side of not having the top and bottom chain rollers installed?

What happens when the chain breaks? It knocks a whole in the casing? Can it hurt the rider as well? Are there any signs that a chain is past it's due date? What is the purpose of the chain rollers exactly?

So you are coming down hill off a mountain or slope and you let the engine do the braking because you do not know any better. Obviously, since you are mixing 2 stroke 32:1 btw, the engine is now not getting any lubrication because you are off the throttle. How far will it go before it seizes...