Search results

  1. F

    01 Blaster could not get old carb to work (Mikuni 26)

    OK men.... Removed the TORS , upped the main jet a few times in increments. Started with the 230 stock for the larger sized carb and then went to the 260 and it got better then again to a 280 with better pickup with less a lot less waaaaaa. There is an after market pipe, K&N filter with no...
  2. F

    01 Blaster could not get old carb to work (Mikuni 26)

    I will remove the TORS tomorrow and go from there. Thanks
  3. F

    01 Blaster could not get old carb to work (Mikuni 26)

    Augusta. Ga about 500' and I have a K&N air filter without a box top. I did read up on changing jets for different temperatures actually the video was very informative. I ordered two sets of jets 200-290 and 300-390 so when they come in I will start testing. I guess I will start with the 300...
  4. F

    01 Blaster could not get old carb to work (Mikuni 26)

    Revs good sitting still. But add a load and it tanks. Have not checked compression, but it ran ok through the gears with the other carb. The older carb had issues with sticking and there was the 32 that was just sitting so I wanted to try it out for a good performance mod.
  5. F

    01 Blaster could not get old carb to work (Mikuni 26)

    I got a deal on the quad and it came with what appears to be an after market pipe. After I get it running well I need to find some rear breaks (brake pedal, cable and caliper/pads). I read up on and watched a plug chop video and that part makes good sense. Just looking for more info before...
  6. F

    01 Blaster could not get old carb to work (Mikuni 26)

    New carb with needle on leanest level and it flat out waaaaaa's at half throttle then once I let loose it comes back to idle. And, thanks for the welcome. I almost ordered a 310 jet today but figured I would get some info from those who know more before purchase.
  7. F

    What Jets Are You Using

    trying to get a Mikuni 32mm to work... the stock idle jet works well (idles well)... 550 feet altitude, what size main jet should I try? K&N filter no box cover.
  8. F

    01 Blaster could not get old carb to work (Mikuni 26)

    so I had a new Mikuni 32 from a friend and put it in with the same idle jet (idles well) and put the same main jet back in and when I hit the throttle it picks up immediately but then acts like it is out of gas. What size jet should I try? I read on here that some went with a smaller jet than...