Search results

Still looking? I've got a couple.

Sorry don' have a rear brake.

Sorry for the late reply, little south of Tulsa.

Don' have a grab bar, sorry.

Who still makes aftermarket A-arms for Blasters? The only ones I've been able to find are Albas and ASR. Also and this should probably be a separate thread, but can you use a banshee spindle with an aftermarket arm if you change from the blaster pinch bolt ball joint to a banshee ball joint.

Sale pending on nerf and bumper

Whoops, NE oklahoma, shipping from 74403.

I've got nearly a complete blaster in parts. If you need something I don' list just ask. Prices don't include shipping, open to offers. Complete set of 88-02 a arms with hubs and drum brakes, ball joints and bearings are good- $80 DG bumper and nerf bars- $60 Motor in a box, broken left case...

I've got 1 with tors and 1 that has the toes delete cap but hasn't been drilled for an idle screw. Pm me if interested.

I had to buy a blind bearing puller when I changed mine. Got one at my local harbor freight for about $25. Nothing else would work for me.

Locktite 640 or 635 works better for this type of stuff. it is actually engineered for slip joints and bushings the can push out in either direction. But yes, if the bearing is just moving a bit inside the housing this could be a bandaid until you can get a carrier.

Just finished up my hydraulic conversion on my front brakes and now I HAVE to do my rear. I've got an 02 bike and have read all the swap info i could find. I have a set of 03+ footpegs but cant find a brake lever. does anyone know what other levers will work? I know there isnt really a direct...

As said above do a leak down test. You can do it with the clutch cover off. If you are sacking tyranny fluid you either have a leak between the cases, crank seal, or crank collar. Definitely get it sealed up before you seize your top end from running lean.

Thanks but that won't work for me. I'm looking for 03 or newer hydraulic brake parts. That's an 02 or older and from the pics looks like it's all cable brakes.

Looking for an 03+ carrier. Front hydro brake parts, possibly rear hydro parts. 03-06 rear brake lever. Any hydro brake parts.

Awesome, thanks for the info. It will be a lot easier to figure out how to fab something up once the parts arrive. I just like to have a better idea which way I need to go with it.

So I really need to fix the brakes on an 02 blaster I just built. Current ly it has no rear caliper and the fronts squeak horribly. Rather than spend money on it twice I decided to go ahead and convert it to hydros all the way around. I picked up a set of 03+ footpegs, but have no brake pedal. I...

Is the reccomended sealant the copper rtv or yamahbond. I'm always a little skeptical about rtv and gasoline mixing, have had good and bad results with it

I've watched the sticky on the fix for a leaking crank collar and read through the thread but didn't see a definitive answer. I replaced my crank with a vitos +3 and got my engine back together but doing a leak down on the bench found i was leaking between my crank collar and the crankshaft. If...

Im nearly done rebuilding a blaster i bought. it didnt run when i bought it so i have no idea where to begin with jetting. Mods are fmf gold fattty with freshly re packed powercore 2, uni filter with no lid, boyenson power reeds, fresh bore with wiseco piston kit 67.5mm, nology coil with...