Search results

  1. bajaislife

    Have to bore my cylinder do i need new jets?

    I just came back from Pismo quad was running great all weekend until I went out for one of my last rides and my quad stopped running. I got back home and my piston ring was melted to the piston. I am boring out to the next size that I absolutely have to. My only question is that if I bore out...
  2. bajaislife

    bad reeds=low compression?

    Asking because i was in pismo riding great then my gf hopped on the quad and we went for a ride and suddenly it bogged out and would not start anymore. The spark plug was fine now my only two thoughts would be a new piston or new rings. When i tested the compression it only had about 30-40. DO...
  3. bajaislife

    Just installed new toomey... idles but dies

    I just installed my toomey, i cleaned the carb the floats seemed to be working fine. I then researched and found the toomey manual for the B1. It says to add a 310 main jet then adjust the clip to the #3 position. I did that. My blaster before never idled and now i want it to idle. I tried...
  4. bajaislife

    4 x 156 Douglas rear rims!!

    I have a set of rear rims for sale!! Unless anyone would want to trade for a 4 x115 bolt pattern
  5. bajaislife

    A Jetting Guide that will help you!

    What pipe are you using? What Filter are you using? What Main Jet are you using? How many turns is your pilot jet? What clip is your needle jet on? What fuel Ratio are you using? Elevation? Any other modifications.. How is your atv running? COPY AND PASTE!! This will answer a lot of...
  6. bajaislife

    Do rear banshee hubs fit on a stock blaster axle?

    Do rear banshee hubs fit on a stock blaster axle?
  7. bajaislife

    What is the deal with the banshee axle?

    I have a 91 blaster and i want to put a banshee axle? What are some problems I may run into??
  8. bajaislife

    I have a 1991 blaster! how do i install my toomey pipe??? HELP

    I just took off my stock pipe off my 1991 blaster. I bought a toomey pipe and i tried installing it but the toomey pipe has spring installs instead of a bracket. I am asking what is the proper way to install it? is there a flange i need to buy?
  9. bajaislife

    Front Banshee Hubs.....

    If I want to put banshee wheels in the front do I have to put banshee hubs/rotors/&banshee breaks? Or can i put just the banshee hub ?
  10. bajaislife

    Toomey Pipe! Is plug chop necessary

    I just bought a toomey pipe and it says that all i have to do is put a 310 main jet and open up the air box. If the bike sounds like its running good do i still have to do a plug chop?
  11. bajaislife

    where do i find a 310 main jet?!?!?

    Where can i find a 310 main jet for the tooomey!????
  12. bajaislife

    I need a start to my jetting !!!!!!!!!!!!! Tooomey Pipe

    I have a stock blaster and I want my jetting to be perfect for my oncoming mods. I run at sea level, 40:1 ratio, with a k&n filter with the air box lid closed. Stock After mods. I will have a toomey pipe would want to run 32:1 fuel (premixed) open airbox with K&N filter I have a simple...