Search results

Bars sold, the carb is still available. Dm mee

Southern Wisconsin, but can ship.

I have a 2003-2006 Yamaha Blaster with a bunch of goodies that are being parted out. Aftermarket list includes: (will be marked as sold) DMC Alien Pipe and silencer- 200$ Wheel spacers front and rear- 75$ (can measure them if interested) Works Front shocks- 375$ Keihin 33 or 36 mm PWK carb?-...

Are you using a castle nut on your axle to secure the hub? My understanding is that this should never be a problem even if you don't properly torque that nut down necessarily, because that pin should prevent the nut from coming off. Did it sheer that clean off?

I would take the clutch cover off and look if it is engaging and disengaging properly. If you still can't find the problem then, I would take the clutch assembly apart and make sure you have all the proper washers and spacers and that they are all in the correct place/order. Also make sure that...

Sorry, I sold the pre-03 caliper.

Southern Wisconsin.

I have a complete quad that I am parting out. It is newer than 2003 by way of the hydro front brakes. The reason for the part out is that although it ran flawlessly, the clutch actuating rod is stuck inside the main transmission shaft. It runs and drives great, just the clutch wouldn't actuate...

I am no expert but I have an idea what it may be. Do you hear gears grinding when you kick, or does it feel and sound like it is not engaging at all? If you are hearing a grinding noise, I would suspect gear wear. If you are basically free spooling, I would look for a problem elsewhere. I had...

That bumper looks absolutely sick. Truly the best looking bumper I've seen modified/stock, or aftermarket.

Just put some spent shotgun shells everywhere! But also on a serious note you could take one of those lock up plugs that screw into the spark plug hole and stop the piston before TDC. Takes probably 2 minutes and might discourage a thief.:cool:

IMO instead of steel, you should use aluminum. Not only for the lightweight factor, but also because it would be easier to work with and shape/bend. Either way you'll manage so just keep on :)