Search results

Does anyone have any information on the dome specifications? I can see that it is a lot different than the blaster head but I have not been able to find any solid specs for the angle of the squish band or the radius of the hemi. Any information or an explanation of how to measure the head would...

where do I find nets for these nerf bars? They don't have any tabs to loop the typical nets through. Any help is appreciated, thank you.

2003, fmf fatty, K&N Filter, mild port, just rebuilt the top end. It won't rev pass idle, it just bogs. Jetting is at 35 and 290. Kicking compression is 130 and it passed a leakdown with flying colors. Went to a 32.5 didn't change anything. TORS is deleted following the guide on here. Tried...

Looking for yellow or black rear and yellow front fenders. thanks

rebuilding a blaster and the old stock carb is gunked up and dried up. Probably time for a new one. Looking for recommendations, I came across the OKO and it seems other members have had decent luck with them. Don't have a crazy budget. - ported stock cylinder (see pics) - FMF fatty - stock...

I'm looking for damaged stock style aftermarket pipe, something that you would have scraped. I just need the end that goes into the silencer to be in good shape, maybe the last 8 inches or so. If you have one that you're willing to cut up I'll throw you a tip and cover shipping. Thank you.

Full set of a elkas, fronts and rear. Bought them for my yz250 swap build but decided to go another route. They're in great shape. They're currently on ebay starting at $650, that's $350 less than a brand new set. I was told they were set up for a 160lb rider with stock suspension but the serial...

I've got 3 400ex rear shocks for sale on eBay. They all appear to be in good shape. Starting at $33 including shipping. http://m.ebay.com/sch/i.html?isRefine=true&sid=brockoffroadparts

Hello everyone, I have a 2005 blaster roller for sale. It's not in the best shape but it has the full hydraulic brakes, all around. I'm looking to get $550 for it and an older frame with bottom end. Can send pictures on request. Located about 20 minutes outside Albany New York. I will consider...

Stator makes weak spark, ohmed low at 160. $6 for shipping and it's yours. Up for a week or it'll get tossed in the scrap bucket.

I'm making this thread to share my progress of my YZ250 engine swapped blaster. I'm sure I'm going to make many mistakes as I go through this build and I'm hoping by sharing my progress I will help others avoid these mistakes. If you have any suggestions or concerns as I go along feel free to...

Does changing the curves in a pipe effect performance? if so, how much? I'm strictly talking changing the curve, not the length.

Looking for a white hood and gas tank cover. Hood must be 03+ style, looking for some in good shape, no cracks or breaks and minimal scratching. if anyone can point me in the direction of a brand new white hood plastic It'd be appreciated.

I've been looking into building a nice set up blaster, To get a new +4 swingarm and roundstyle carrier is almost $700, but to just get a stock style +4 swingarm it's only $250. It doesn't seem to me that the roundstyle carrier is worth $450 more but I was wondering what everyone else thought.

DG pipe and silencer, ported cylinder (bought a motor to use the bottom end and the top end was brand new and ported, looks like a mild port) stock carb with airbox and full lid, 150 psi, 67.25mm wiseco piston, running from 0-1000', temps in the 80s. Not sure where to start, i looked around...

Torquing the cylinder to the bottom end with a proper torque wrench is impossible because of the limited space between the nut and the fins so I thought, why didn't Yamaha puts holes in the fins so you could reach a socket down and properly torque the nuts? I decided I would experiment with my...

I bought a 2005 blaster roller the other day, complete with hydraulic brakes, all there and very clean. I have a few options for the motor and one I think everyone will vote for. Here are the possible motors. - Stroked big bore blaster, ported. - yz125 - YZ250!! I'm at the same spot with all...

Hello everyone, new to this forum and new to blasters but I had a banshee before. Bought my girlfriend a blaster but I'm having trouble getting it idling and running smooth it's smoking a lot, and I have the air screw turned way pass 4 turns and it was almost starting to run smooth. The weather...