Search results

I finally getting time to mess with my son quad. Short store It was a basket case. Put banshee axle and front hubs and braked on it Keeping the cable rear brake. Hope I can rebuild them . They are hard to get them to engage. Another question is it hard to bend the steering stem. I finally...

Has anyone rebuilt a rear brake caliper. My is a little hard to get the brake to operate. Any suggestions is welcome.

How many hours can you get out of a rod bearing. Before you need to start worrying about it Thank you

I purchased a carb off ebay it about a year and half ago. Got so pissed off. It been seating . My son been begging and wanted to go ride. ) I am in need of a carb to finished the quad rebuild.

How do you soften up the old boot to fit the carb. I put it in boiling water, used a heat gun and paint thinner. I really don' want to buy a new one. ANY SUGGESTIONS WILL BE APPRECIATED. Thank you.

I just received a carb with out a jetting and needle. What is the stock pilot jet and stock main jet on the blaster. What needle is stock on the blaster.

I need a stock carb for my son quad. I prefer it to have the tors deleted but if it has it will be ok. PayPal is ready .

I am having issue to attaching the air box intake to back of the carb. I used hair dryer to help get the rubber softer force on the carb.. I don't have caliber measure if it will fit. So my question is will it fit if not what did you use.

The axle is loose. The new axle doesn't have the rise like spacer on the rotor side. Can someone post a pic of the rotor side. I tried to post pic but can't get it to post.

The axel doesn't tighten up. Can someone tell me is there a spacer on the rotor. if there is a spacer is it part of the axle r slid on . can someone take a pic of the rotor side. so I can compare axles

The blaster didn't come with a axel so I got one off Ebay .it was supposed to be a banshee axel. The rotor has about a lot of room to mover around. I found a bent blaster axel to compare it . the blaster axel has a rise spacer on the rotor side. is that part of the axel or is that the spacer...

Is there anywhere you can look for bolt size and thread pitch that go on this blaster. Need bolts for the engine , front bumper grab bar and stud for the rear hubs.

I am try to install a the DMC Exhaust and I can't get the silencer to line up with any hole at the rear grab mount. Does it mount to right side if u are setting on it . Correct. Me if I am wrong. I appreciate any suggestions

I am in the process of putting the axle into the axle bearing and the axle will not fit. I wondering why it won't fit. Is it that tight of a fit. Do I have to change out axle carrier bearing with a banshee carrier? Or do I have a wrong axle all together. A ebay special.

What would be the jetting on a pwk 28 with stock cylinder and head but has a dmd exhausted. At 500 feet above sea level. Thank you

I bought a 2001 roller with no engine are wiring harness. I found a 2004 engine with wiring harness. Got the frame pc and up grades to front and rear brakes system. Now I got a roller again with engine in the frame. With the new wiring harness my on / off switch didn't work with the new wiring...

I bought a 2001 roller with no engine are wiring harness. I found a 2004 engine with wiring harness. Got the frame pc and up grades to front and rear brakes system. Now I got a roller again with engine in the frame. With the new wiring harness my on / off switch didn't work with the new wiring...

I have a 2001 frame I got cheap and got a 04 engine with wiring harness with coil and a black box ( cdi ) guess the name. I have a aftermarket carb . Trying to figure out how this wiring works. I think I will look for a 04 on/ off stitch . Is there a wiring diagram somewhere to help me. Let...

Does anyone know where to get a carb cable for this carb at. Sudco didn't have one in stock.

My son wants black rim on his blaster we are building for him. So what year did they come with black rims. I know I can paint them black but the paint doesn't stay on them if you ride in a rocky trails.