Search results

  1. o4blastie

    wanted stock blaster carb

    I think I still have one laying around, I'll have to check
  2. o4blastie

    4mil build

    I'm right here with you, 12-13 hr days 5 days a week plenty enough to keep me away from my projects, I just piddle when I can
  3. o4blastie

    4mil build

    I swapped out the BEN needle for the DGH, started with the 165 main , 48 pilot and go from there, also I need to drain and refill the oil, i think i may put a little too much in there to begin with by accident, also picked up 8 BR8ES plugs for plug chops, just need more hours in the day to tune!!
  4. o4blastie

    4mil build

    Hopefully this should get me in the ballpark
  5. o4blastie

    4mil build

    Okay, wouldnt I need to take carb off bike to set float height? I'm going to buy a few extra jets today and play around with it some, see what I come up with, its 50 degrees out today
  6. o4blastie

    4mil build

    So do you think the needle is okay? No need to change? I'll grab a few jets down and go from there, and play with the needle clip settings some more and see what I come up with..
  7. o4blastie

    4mil build

    So I checked the carb, it has a #6 slide, the needle has BEN stamped on the side, 178 main and a 48 pilot, is this a good starting point or do I need to buy a different needle, jets ect.. I noticed you mentioned a specific needle one other day, is that a common starting point?
  8. o4blastie

    4mil build

    The temps were close to 70 last weekend when I started it and rode up and down the road, I took the plug out after that immediate ride, plug was dry looking, but I didnt do any sort of plug chop, I think the needle reads BEN but it's been a while since I looked at it, I need to recheck...
  9. o4blastie

    4mil build

    I never really hit the throttle much, may have been loading up because I was nervous to start the bike to begin with, or even give it much gas, here a few pics I took previously of the jets, may need to grab a few more to play around with
  10. o4blastie

    4mil build

    Well, I bought the 36mm airstriker carb off the "13k Blaster" from Ken, it was setup on that bike which is similiar to my build, but I rode it down the road yesterday, kinda boggy, feels like it needs to be a bit crisper, anyone have any base line setting to start with, I ride at sea level, but...
  11. o4blastie

    4mil build

    Thanks, To be honest not sure on swingarm, other than its plus 4, and so is the axle, was told it was dura blue brand, RAD carrier, and at the time I was building the frame up a while back, didnt have money for hydraulics, so welded the old school brakes up on it, just ready to throw a leg over...
  12. o4blastie

    4mil build

    Been tinkering with this thing over the past couple months, heres just a couple before/after pics, couldn't ever decide a color, but ended up with this instead. Still working on getting it all back together, tying up loose wiring ect, more to follow
  13. o4blastie

    ISO toomey pipe or right bend pipe for my 240 build

    Spare, but I swap back and forth, just curious what people pay for these now, I believe its a Heterick Racing full exhaust
  14. o4blastie

    ISO toomey pipe or right bend pipe for my 240 build

    Only asked because I have a spare......
  15. o4blastie

    wanted stock blaster carb

    anyone else looking a stock blaster carb? dm me
  16. o4blastie

    ISO toomey pipe or right bend pipe for my 240 build

    What do people pay for right bends now a days?
  17. o4blastie

    Shocks, Exhaust

    10-4
  18. o4blastie

    Shocks, Exhaust

    I do
  19. o4blastie

    Shocks, Exhaust

    Sure, throw me an offer..
  20. o4blastie

    Shocks, Exhaust

    So you looking front banshee shocks, and stock rear all together?