Search results

Pictures by Bretwalker - Photobucket hope you enjoy the work?

the kick starter om my kids blaster wont return. but when i shut it off it will return all by it's self. took it apart looked at it everything looked like it was supposed to by the book. worked great for 2 or 3 starts than it's just laying their on the foot peg till you turn it off and it...

http://s1223.photobucket.com/albums/dd520/Bretwalker/

yesterday i was getting blaster #3 ready checking things over before the next trip, and realised it was ideling really high and wouldn't come down si idecited to do a leak down test. Guess what i have an air leak between the case halfs about 3" below the exhaust port. i WISH it wouls have been...

This is an email that i sent to Ken today thanking him for what he does Hey Ken just wanted to drop you a line i sent one of mt blaster heads to you about a month and a half ago after i had talked to you about your DIY port work on the blaster forum that i had done. Well today i took it over...

I am going to start to rebuild a spare blaster motor that i have setting around and am verry seriously thinking about putting a +3mm crank in it. does anyone besides vitos make / sell the +3mm crank rod assembly? and 2nd how has everybody liked them? any mod's have to be made to my cylnder...

i am going to go look at a blaster for sale it looks like a basket case the guy claims the piston skirt shattered and it's tore apart it sounds weird to me the pics he sent me it has a stock exhaust on it and is advertised as big bore bored to 250cc that os the first red flag i am thinking it's...

i removed the tors from my daughters blaster because i thought it was sticking coming back down to idle and at the same time i replaced the pilot jet to a 35. my problem is it comes down to an idle in stages like it has an air leak. i did a leak down test it holds 10psi for half an hour the top...

i have a problem with one of the carbs on my kids blaster i DID do a leak down test to ensure i dont have an air leak. my problem is that i cant get the bike to idle down as fast as i think it should after reving it up a little, it comes down to idle in about 5 seconds and in stages like an air...

i just got the head back from Ken this afternoon for my daughters blaster i couldnt wait so i dropped everything and put it on.I had alredy done the diy porting that Ken has on here but needed to get some of the low end back so i contacted ken and he explained what was needed. WOW i got the low...

i am looking for a good clutch basket the one in my son's blaster sticks when you put it in gear has notches worn pretty good in it. or if anyone knows where i can get a good billet basket w/o killing the checkbook.X(

Friday left for the weekend things went bad before i even got far lost the tranny in my truck while pulling my toy hauler, limped it back home, threw the close in the wifes car put the dogs back in the house called mother in law to ask her to watch dogs( let them in/out) took off late going to a...

i want to start upgrading one of the blasters suspensions to a little smoother ride what is the best BANG for my buck?:o

just finished the top end re build on one of my daughters blasters i did the diy 1mm port job that ken Oconner has video to re assembled everything and fired it up today.Great!! i now have 3, 15minute heat cycles in it and took it for a short little ride down the street when i get to 1/4...

anyone know if their is someone that makes an aftermarket hose clamp to hold the carb to the boot? can always use radiator hose clamp but i want something right and that looks good, tired of the soft screw head on stock ones and not being able to get tight because of the screw heads X(

i sure am glad that i got a leak down tester. today i assembled a top end for one of my girls blasters threw the leakdown tester on it and MAN the reed cage leaks like a sieve. felt bat about using silicone to seal it up (ugly) but when i check it in the morning it should hold pressure. i guess...

Ok here it is i have an extra motor (complete) with a bad crank i am going to rebuild it, i did the port work myself following ken Oconners diy videos. my next quandry is go stock stroke or 3 mil ? and with that is the 3 mil stroker going to mess with the 1mm port work that i opened up the...

has anyone have any experience with the pro x top end gaskets for the blaster? i have always used vito's or cometic in the past. just wanting some feedback before i bought some and a few for stock(back up):o

any one know where i can get a toomey silencer at a fair price?I:I

does anyone know if the silencers for toomey,fmf and pro circuit are interchangable with each others pipes?:o