Search results

  1. Wheels434

    How To Remove Your TORS (03-06 models)

    If it's okay to leave the TORS system connected to the carb, why do you highly suggest that you buy a removal kit?
  2. Wheels434

    Carb Rebuild?

    So the blaster is running great.. But it's gas is spilling out of the overflow tube AGAIN!? Is it possible that the needle float could have come unattached from the float again? If so is there a way to keep this from happening over and over?
  3. Wheels434

    Carb Rebuild?

    So... My dumbass never attached the needle float to the float... This is why my carb was spilling gas out of the drain tube. Now I just need to dial this thing in... what can I say? You live and you learn..
  4. Wheels434

    Carb Rebuild?

    So I have completely replaced, cleaned and looked over every nook and cranny of my carb and it's still leaking gas from the drain plug. The float is fine and seems to be in the right position, the needle is not bent, the seat and float needle are spanking new and all jets are clean. Absolutely...
  5. Wheels434

    Carb Rebuild?

    Awesome man! Thanks a lot :) Where can I get a syringe like that?
  6. Wheels434

    Carb Rebuild?

    Thanks for all the very useful information. Now.. how to bleed the oil line of air? Do I do this before or after hooking it back up to the carb? How do you you remove the seat for the needle float?
  7. Wheels434

    Carb Rebuild?

    By the way that's not my carb. Just needed a good pic to figure out the placement of those hoses. My oil mixer is still intact and will stay that way as long as it works. I plan on checking all the lines tonight as well to make sure none are dry rotted or clogged.
  8. Wheels434

    Carb Rebuild?

    Well that takes care of that problem. Now to focus on keeping the gas from pouring out of the drain plug! Thanks dudes.
  9. Wheels434

    Carb Rebuild?

    I finally found a picture that shows the side of the carb I need info about. If someone could explain the hoses coming out of this side and where they go that would help me tremendously!
  10. Wheels434

    Carb Rebuild?

    I dunno...Could it? :D
  11. Wheels434

    Rear tires fitting stock wheels?

    Here she is from the front.
  12. Wheels434

    Rear tires fitting stock wheels?

    Oh yeah Blaaster haha I'm new to working on the Blaster but not that much of a tard lol. :D
  13. Wheels434

    Rear tires fitting stock wheels?

    Ohh WOW you are right... That will be take care of tonight for sure haha. I didn't put the tires on the rims or put air in them so, not my fault haha. Thanks for noticing!
  14. Rear with 5" spacers and 20x11-8 Nanco tires

    Rear with 5" spacers and 20x11-8 Nanco tires

  15. Front no spacers

    Front no spacers

  16. Rear no spacers or tires.

    Rear no spacers or tires.

  17. Front with 5" spacers

    Front with 5" spacers

  18. Before and After

    Before and After

    Here is a before and after of my 03 blaster. Mods as of now are 5" wheel spacers on front and back and some Nanco 20x11-8 rears. Lots more to come this bike is bone stock minus the mods listed
  19. 20130304 205030FORUM

    20130304 205030FORUM

  20. 20130304 205109FORUM

    20130304 205109FORUM