Search results

i am making my christmas list for wifey.and i am looking into getting a few new tools for around the house and to help with the blasty..first i am looking into a impact driver possibly cordless but i know nothing about torque power speed etc..next is a blind bearing puller with hammer i think...

from talking to awk and ken i finally got my motor fully apart and all tbe bearings and seals out I:I my next question before i go any further is what can i safely soak my case half's in to clean them up and get the grime out?the cases have been sitting a while so there dirty and im looking to...

i have a second bottom end i am going to rebuild as a back up motor.i have finally got the cases split and currently trying to get the transmission out to replace all bearings and seals..i looked at the clymer book and it shows how but i still cant figure it out..i see the two dowel pins that...

i saw this on ebay and the guy states that the current bore is 66.67 and its .025 over stock.. this is totally wrong right??? here is what the ad states Cylinder jug, piston, rings, pin and bearings. Cylinder bore is 66.67mm, which is .025 over stock. May need to be honed. Fits all models...

looking for stock cylinder,something in good shape that i could get ported.

my buddy has a blaster he is trying to jet,we both cannot find any info online for stock mikuni to 30mm oko..were trying to find him a good spot(ballpark) to start. his mods are fmf pipe,bored .50 over,32:1 premix,open airbox with outerwear,and unifilter, we are at 300 feet above sea level if...

i am looking to purchase the tusk axle,i noticed it said something about needing a axle nut wrench(from tusk) to tighten the tusk axle nut's on..my question is,is the wrench for the tusk axle nut the same size as the stock axle nut?or do i have to buy two different wrenches?also should i maybe...

i noticed my carb is getting pretty rough looking so im looking to upgrade..i was thinking about either a 28mm or 30mm.my question is which one or either one and what brand?my mods are listed under my pic..thanks everyone I:I

well i took my blasty for spin today and when i was shutting off the petcock i noticed a little "i mean little" spot directly under the carb.at first i thought it was fuel and put my finger in it and smelled it..it was oil.it was clean looking but still it was oil i think..what else could it be...

ok now i 100% need goggles.i got away with it for a little while but i just put on a maier race front and the mud really flies up I:I . so what is a decent goggle that fits well over a helmet?

Where can I get a smaller tube for my cfm air box? The one I have is for a larger carb and I need one for the stock 26mm?Lowes?? What's it called?

i was planing on buying the tusk axle and i was looking on ebay and found a lonestar billet brake hub.it states it will fit the stock axle..this it what the website says... Closeout Item Save Big $$ Lonestar Racing Billet Aluminum Disk/Rotor Brake Hub (Works With Stock Or Lonestar Axle)...

the stock light on my 02 blaster is really scratched how do i remove the glass lens?i got the retaining clips out and the tabs i bent up but it seems the lens doesn't want to come out.am i doing something wrong? :-/

i don't know what i did but i came home from work tonight and this was sitting in my chair..put a smile on my face,untill i thought "what did she break of mine" lol..i was talking about buying it for a little while but money's tight on my end.and then this.what a wonderful wifey!!lol i think i...

i noticed on my blasty when i got it back from the dealership that the head stud,one is shorter than the other three and they put cheap nuts on also(on base nuts too)so im ordering the oem studs from rockymountain and since i will have the cylinder and head off what gaskets should i get too?i...

a friend gave me a complete bottom end and all thats missing is the 4 studs that go on the bottom end that holds the cylinder.where can i buy those and what are they called exactly?

i was looking at the trail tech lights but there 35w bulbs and run 70 watts.so i need the ricky 75w lighting coil.how hard is it to install this?is it just two screws for the coil itself?i saw the whole stator plate with degree adjuster for like 125.00 but do i really need all that or just the...

i found a 05 blaster headlight on ebay pretty cheap.but it's not in the hood.how would i mount this in a hood?do i need special brackets?or just a 03+ hood?

i purchased a leak tester off a fellow member(jus_me)lol ..and at first i was a little afraid of using it,thinking "what if"i have a leak,im very new to a 2 stroke and felt at first overwhelmed if i needed to tear into it to fix a leak..but as i kept reading posts i got the nerve to use it...

when i installed my lsr +2 arms i noticed the left tire (looking from pic)is a little inward..how do i adjust this to make it like the other?