Search results

  1. dksix

    String Trimmer Rebuild

    I have an Echo SRM-2100 trimmer and yesterday while using it I got to thinking it just doesn't have the power it used to. It's well maintained, freshly serviced and properly adjusted but has some use on it. I think I've had it near 10 years and got it used from a friend. With the amount of use I...
  2. dksix

    LT450R Nerf Bars for my Blaster

    The only Nerf bars I really like are the XRF Pro Pegs from eBay but at near $300 are pricey. I didn't want to pay $100-$150 for ones that I didn't really like and couldn't make myself let go of $300 for the ones I do like but need Nerf bars, so I thought I give a try at modding a set that are...
  3. dksix

    First Ride

    After at least a year I had mine out for some breaking in today. Just rode some around the house, first time it's been started and I'm following KOR break in routine......so no performance reports yet. This is the engine from the all stock first bore 01 I bought first, with a KOR topend (ported...
  4. dksix

    Idle screw

    I need an idle screw and don't want to wait for one to come in. I can turn one myself but rather than reinvent the wheel was hoping someone could give me some rough measurements. Just need an over-all length and length and diameter of the unthreaded section and length of the threads.
  5. dksix

    Carrier to swingarm bolts

    I need a pair of carrier bolts, the longs ones that mounts the carrier to the swingarm.
  6. dksix

    Wheels/Tires, seat and scoops

    I have 2 sets of rear 8" polished rims, both with 18x9.5-8 tires. Different name brands but the same basic wheels, one set is Blue Labels, $100 per set, shipped. Pics of one of them. A set of SAR Motorworks air scoops, good condition, won't work with Maier race fronts. $50 shipped Here...
  7. dksix

    Android Phone

    Looking for something lower priced, pretty good condition and can be done with some type of pre-paid plan for my 10 year old son. I would prefer a phone I could put an AT&T pre-paid SIM card in. They seem to have the best prices for the type of service I'd be looking for. I honestly don't know...
  8. dksix

    03+ vs 02- steering stems

    Are the steering stems from the 03+ the same as earlier stems? I'm selling one and have both. It would be easier to take it from my 04 chassis but it's going to someone who has a pre 02 frame, just want to make sure I'm sending him one he can use.
  9. dksix

    For the tool guys

    I'm finally getting to the end of my CR250 rebuild. I've had the bike over 2 years, trading for it with the engine in a box due to busted cases. I posted about the boring job that I had done at a local bike shop. It was done before I had joined here and at that time I didn't know that the ports...
  10. dksix

    Custom but Minimal Wiring Harness

    Since I'm using the Maier front hood/fenders, I'll not be using a headlight and I want to eliminate everything but a basic push button kill switch I decided to make a custom harness rather than hack up one of my good wiring harnesses. I looked that the drawing in RatBlaster's "easy wiring...
  11. dksix

    Top End, 03+ hood and head light

    I've got a complete running top end, 03+ headlight and hood that I'm not going to be using, thought I'd see if anyone here wanted it first. The top end is from my 01, still installed. It runs good, starts easy and pulls hard but I only got a little over 90 psi on the compression gauge when I...
  12. dksix

    PEP TRX250R Shocks on eBay

    Just thought I'd put this up in case anyone would be interested. Not mine, just saw the listing...... Pep ZPS Shocks 400EX 450R KFX DVX YFZ 250R Honda Z400 TRX450R TRX Suzuki 400 | eBay
  13. dksix

    CL Blaster Listing

    I saw this today while surfing CL for bargains. It has peaked my interest, I wonder if it's really a Trinity 265 engine? It's a little over an hour away, if I can make the time this week I'll call about going to have a look. It's call only or I would have texted about it. nice blaster
  14. dksix

    30mm Carb Suggestions

    I'm looking to go up to a 30mm carb and I'd like some recommendations for which carb to use. I'd like to hear from people have used them or tried to get them right, first hand experience preferred.
  15. dksix

    Spring Rates for Extended A-Arms

    Should the spring rate be higher when going from stock length to extended A-Arms? OEM Banshee front shocks being used with +3 A arms. 200 pound rider, trail ridden quad.
  16. dksix

    Does anyone have these nerf bars?

    Looking at these Yamaha Blaster YFS200 YFS 200 Nerfbars ATV Nerf Bars Silver Bars Black Nets | eBay . Has anyone used this kind before? Opinions on them?
  17. dksix

    Barack Obama vs Mitt Romney

    <iframe width="560" height="315" src="https://www.youtube.com/embed/dX_1B0w7Hzc?rel=0" frameborder="0" allowfullscreen></iframe>
  18. dksix

    Spray on Chrome

    Has anyone seen the spray on chrome? I don't sleep much and over night reading on the net I stumbled onto a YouTube video of someone doing it. http://youtu.be/y9mh6t0ILvE This isn't a cheap alternative to real chrome but it looks like it can be done to more substrates. I found this place selling...
  19. dksix

    89-90 Banshee rear hubs

    Looking for a good price on a set of the big pattern hubs (4/156) from the 89-90 Banshee.
  20. dksix

    KOR Banshee Head Video

    In the video you said that you set the spindle slightly off square with the bed. Could you explain this a little more? I would have thought that the bed being square with the head would be a must. I looks like this would leave a slight concave on the head instead of it being flat. Thanks for the...