Search results

  1. darnizzle8805

    What jetting with PJ34mm and unipod.

    As the title states, where should I start with jetting with my 34mmPJ with a Unifilter pod. I have decided against using the CFM airbox. I dont ride through water and I will run a prefilter on the pod. Any and all help is appreciated
  2. darnizzle8805

    Biggest carb/stock intake?

    I've bored out the stock intake to fit a PJ34. I had to get a new clamp but it its. I got the stock boot to fit without boring the stock intake, but i didnt have a clamp that big. So I bored out the whole thing to fit my carb and to make it more free flowing. There is no sense in having a big...
  3. darnizzle8805

    How to tell a big bore kit from stock?

    with the stock carb I was running the stock airbox, with the pj34 i want to run my cfm box. The jug isn't ported, so I doubt the head has been rechambered. i'll pick up some jets. do you guys think the 48p is too big?
  4. darnizzle8805

    How to tell a big bore kit from stock?

    Alas I have a stock cylinder. It has a cast piston in it also, so i highly doubt that it's a BBK sleeved stock cylinder. I checked the jetting in the stock carb: 220m, 32.5p, 2nd from top slot. I guess I shouldnt have put so much faith in the man who has been a motorcycle and car mechanic for...
  5. darnizzle8805

    How to tell a big bore kit from stock?

    I know that it's not an LA Sleeve jug. I know it has the 195cm.cu. markings but I cant remember if it has the Y-1 marking. The whole topend is black so I didn't know what it could be. Now I know what to look for, as soon as I get to the house i'll double check for the markings.
  6. darnizzle8805

    How to tell a big bore kit from stock?

    Thanks Awk. That helps a lot
  7. darnizzle8805

    How to tell a big bore kit from stock?

    As the title states, How do you tell a big bore jug from stock? I am replacing my carb with a 34mm PJ. I am trying to get a ballpark to set my jetting to. As we all know when replacing a small carb with that of an oversized unit, you have to modify your reeds. I have bored my VF3 that fits into...
  8. darnizzle8805

    Keihin PWK vs PJ???

    Not to thread jack, but I scored a like new PJ34 for my Blaster. It has 150 main, 48 pilot, needle on 3 notch. I ride between 35-50ft elevation level. My Blaster has Cfm air box with Unifilter, 240bbk, VF3's, FMF pip and silencer. What might be good Jetting to start off with?
  9. darnizzle8805

    Shorty Levers

    only thing is I have hydro brakes.
  10. darnizzle8805

    Shorty Levers

    Well I have installed my shorty clutch lever. All that I have to say is.......WHY THE F*** CANT I FIND A BRAKE LEVER!!!!!! But seriously I love my clutch lever. There Is no increase in force required to pull it what so ever, and I dont smash my fingers from time to time when I clutch with 1 or 2...
  11. darnizzle8805

    New carb or T.O.R.S delete?

    I won a 34mm Keihin PJ carb. came off an '86 250r
  12. darnizzle8805

    New carb or T.O.R.S delete?

    Well I wont be able to buy the 35mm Airstryker I found. Someone found it and ran the bids up. I did however win this: Keihin 34mm PJ05A | eBay I was looking up info on PJ carbs and I found out that its best for low to midrange power. I preferred a mid to top end PWK, but this should work find...
  13. darnizzle8805

    Shorty Levers

    wwholden how do you like your levers?
  14. darnizzle8805

    Shorty Levers

    I was checking it out last night, the Blaster master has a lower and wider reservoir than the 300. Like you stated I am going to just try it. I ordered a rebuild kit, and when it arrives then Ill swap everything and hopefully I am good to go.
  15. darnizzle8805

    Shorty Levers

    I am deleted T.O.R.S and my parking brake on my 2003 Blaster. As you guys know that leaves me with an ugly clutch perch. I ordered a new clutch lever and perch. But I haven't been able to find a matching brake lever. I ordered: NEW Yamaha Blaster 200 shorty clutch lever and perch assembly...
  16. darnizzle8805

    New carb or T.O.R.S delete?

    Also found a 35mm airstryker. that would be even better to own
  17. darnizzle8805

    New carb or T.O.R.S delete?

    I've found a 34mm keihin pj. I placed a bid on it and hopefully I win it. Even if its not a 240, I won't have to buy a bigger carb later because I will have a great carb already.
  18. darnizzle8805

    New carb or T.O.R.S delete?

    I've seen the 30mm OKO carb going for $50u.s plus shipping. I am just lost on which say to go.
  19. darnizzle8805

    New carb or T.O.R.S delete?

    My stock carb leaks, and instead of cleaning it AND installing a tors elimination kit, I can just install a brand new and bigger carb for more performance. I think i'll take more performance over no performance increase and the possibility of my carb still being leaky.
  20. darnizzle8805

    New carb or T.O.R.S delete?

    MOTION THROTTLE CABLE YAMAHA BLASTER TORS ELIMINATOR | eBay is this the cable I need with the 30mm oko?