Search results

  1. turbowrenchhead

    Where can I get different base gasket thicknesses?

    Found .015 on ebay. Heard vittos are no good. And stock and thats it.
  2. turbowrenchhead

    Where can I get different base gasket thicknesses?

    I'm rebuilding my mild port, modded head blaster engine. I built it 10 years ago and it finally gave out after much abuse. I want to get the squish to .050 and get the compression up a bit. But doesn't seem to be much out there for base gasket sizes. Any suggestions?
  3. turbowrenchhead

    Intake boot for 36mm carb

    Its been 10 years since i built my blaster. I had the rubber boot rip on it and I have no idea where I bought it. Can you guys point me in the right direction.
  4. turbowrenchhead

    Where to purchase +3 tie rod extenders?

    I've had my blaster for 10 years or so now. I let my brother an law ride it and he hit a tree. Bent the tie rod bad and it needs to be replaced. I can not remember where I got them its been years now. Can you guys point me in the right direction please.
  5. turbowrenchhead

    Where to purchase +3 tie rod extenders?

    I've had my blaster for 10 years or so now. I let my brother an law ride it and he hit a tree. Bent the tie rod bad and it needs to be replaced. I can not remember where I got them its been years now. Can you guys point me in the right direction please.
  6. turbowrenchhead

    Bogging issues

    It was a broken Reed. Good call!
  7. turbowrenchhead

    Bogging issues

    Never even thought to check! I'll check tomorrow.
  8. turbowrenchhead

    Bogging issues

    Its been a long time since I've been on here. I've had my 02 Blaster for probably around 10 years. When I went to build it I used this forum allot. The members on this forum were great! So I've had my blaster in storage for 3 years. The last time it was rode was 2 summers ago and it ran great...
  9. turbowrenchhead

    Very boggy after rebuild

    Have a tester. Haven't had time to run the test. Stock stator so it can't be off on timing.
  10. turbowrenchhead

    Very boggy after rebuild

    Compression is 140. gas is flowing fine. Air mixture screw at 2 turns out. Haven't run a leak test. Gaskets installed dry. When I got it running if I sprayed starting fluid into the carb it would kill the engine. It's it had an bad air leak the engine would rev but that's not the case
  11. turbowrenchhead

    Very boggy after rebuild

    Tried a new plug, same issue.
  12. turbowrenchhead

    Very boggy after rebuild

    I picked up an 88 blaster in nice shape for cheap several months ago. I replaced the transmission, did all all new seals and gaskets. Had the cylinder bored and a 67mm vitto's super stock piston dropped in. Got it all back together and tried to fire her up and I got nothing. Did some diagnosing...
  13. turbowrenchhead

    Quality stator replacment?

    Whats a decent moderatly priced aftermarket stator that will is plug and play ready. I know race tech electric makes a decent product but they only offer a rebuild kit. I don't want to mess with wires.
  14. turbowrenchhead

    Blaster dynoed

    The DMC has an available sos insert to drop the decibel to 98db and a separate spark arrestor can be purchased. It will probably be close to $400 for everything. I'll end up putting it on. Just not right now. Too many things going on right now that require $$
  15. turbowrenchhead

    Blaster dynoed

    How about this RH pipe? I might not have to modify it to fit my Q series muff with front pipe. http://www.ebay.com/itm/FMF-Racing-SST-Pipe-Chrome-Fits-Yamaha-Blaster-1988-2006-020439-27-1473-/331035737172?pt=Motorcycles_Parts_Accessories&hash=item4d13447c54&vxp=mtr
  16. turbowrenchhead

    Blaster dynoed

    I'm not familiar with RH pipes. What would be a good choice and who do I buy from?
  17. turbowrenchhead

    Blaster dynoed

    Ok. So what are my options with me having to use a q series muffler? What size carb? I put the 35 pwk on it power kens recommendation.
  18. turbowrenchhead

    Blaster dynoed

    Where I find everything I need...the internet.
  19. turbowrenchhead

    Blaster dynoed

    On another note. I've been dating this chick for a year now and we haven't been out riding together kid free until last Sunday. She used to ride a Raptor 660 at Glamis and all over down in AZ but this was 6-7 years ago. She's been going on and on about how great a raptor is and blah blah blah. I...
  20. turbowrenchhead

    Blaster dynoed

    Next time I pull the blaster out of the corner I'll check the pilot and needle on it. I know its about 4 or 5 sizes richer then what Ken had recommended. Its also on the richest clip position. When I first got the motor back and on my first trip the piston had cold seized a few times. A piston...