Search results

I am in the process of replacing crank seals on my cousins blaster. When I got to the cluch side, I took off the pressure plate. The rod will turn, but not come out. I'm assume the rod/ball is welded. How have others removed these without splitting the cases?

I know this has been asked several times, and I have searched, but I only want to do this once. I have changed the bearings, plastic bushings, and seals in the swing arm. They are in exactly as the old ones were. I have the dust caps with shims, washers, and seals there also. My main concern is...

I swapped out my clutch, greased the rods and ball bearing, adjusted like it should be while holding aligned with mark on the case. Then I put on a new motion pro clutch cable that I picked up. The cable was loose and I had to turn the adjuster on the perch just about half out to take up the...

I just rebuilt the top end, and decided to change my clutch and while I had it tore down that I would change crank seals. I pulled the clutch, clutch boss, and the gear on the crank. I pulled the collar out of the seal and off the crank. There is a bracket that covers the bottom half of the seal...

I just picked up a stock carb for next to nothing, and while cleaning seen a screw opposite and a little lower than choke. It is turned in all the way. What is it for? choke?

I have begun to make my tester. I am going to lowes for the rest of what I need tomorrow. I already have brass T, 15 psi gauge, schrader valve, hose, and other brass fittings. My question is, what is the exact size of the pvc that goes in the stock boot? I have searched and seen 1" x 1/2" and 1...

I think tapatalk would def be an improvement to this site for android,iphone,blackberry, if it could be added. tapatalk site

Bear with me here. I wanna say silencer? The back aluminum muffler on my blaster. The cap that is in the back, that you pull out and there is a tube with fiberglass packed it it. I took the cap off and the tube was so rotted and broke off. Will this harm my engine or really affect performance...

I live in Tamaqua and am looking for people/ groups to ride with.