Search results

Well fellow blaster community I’m back, I know it’s been awhile since I’ve been around but I have been extremely busy with moving, work and family. But after a long hiatus I’m back in the game. Last year I purchased a 96 DR650SE that has been completely torn down and is being built from the...

Hi everyone long time no see.Been very busy lately well here go's,A few weeks ago I picked up a new to me 89 Yamaha banshee I got it for $400 and it ran OK but the guy that owned it before couldn't get it to run right so I got it home tore her down and replaced everything that needed replaced...

Well guys I got a new quad today its a 06 Polaris predator 500 TLD.I was trying to sell one of my spare blasters for funding towards another one of my blasters but the thing is I got a guy that contacted me saying that he has a 06 predator that's to much for his kids to handle and that he would...

I bought a Vito's stuffer crank from a member and its supposed to be a 3mil stroker crank and the funny thing is I had my 240 cylinderhead cut for this and I did a compression test on it and its only at 132psi? sooo I then put a standard stock cylinder and head on it and the piston did not make...

OK guys well I found out why my other blaster wasn't wanting to rev up,today I figured I take off my adjustable stator and slap it on my new ride and well well to my surprise when I went to start it up the same exact problem occurred it would not rev up I knew instantly that the stator was the...

hi everyone I have a few questions, I'm looking to pick up a new carb for my new blaster I'm looking at the PJ and pwk I know the PJ is more low end torque and pwk hi end and I'm looking for more low end so I'm thinking PJ I also think that a 150 main and 50 idel would be a good starting point...

hi guys its been awhile since I was last on I've just been so busy with moving and life stuff but enough of that I'm pleased to tell you guys that I just picked up another blaster but this time a very nice 06 I scored this one for only $900 ha ha lol because I got it from a pawn shop that a...

hi guys its been awile since ive been on lol but no worries i still have the blasty,ok to start things off i had a vitos 240 witch came with the bike i did not realize that it was gone so what im doing now is im picking up a real nice cylinder and head just done its at 66.50mm so not to bad,now...

Well today i got my engine done and cranked it over for the first time,but i ran into some big time problems,the engine is not wanting to rev up what so ever its unlike anything ive ever seen in my life,i would like to post a vid or a link to a vid so the pro's on hear can see whst im talking...

ok guys I'm about to buy my piston and need to know a few things,first of all I have a vitos 240 bbk on it's standard piston,now I've been told to run the wosner piston but I need to know where to get this piston from? every time I type it in LA-Sleeve pops up? is that the piston? also can that...

ok guys I've decided not to run lights and would like to know can I just remove the two little lighting coils from my stater? also I would like to get rid of anything ealse that's not needed for spark,thanks for all the help guys :)

Alright guys I'm looking to get a new pipe hear soon,I want what's best for my set up and hear it is>>> vitos 240bbk ported 2mm up on the exhaust and 1mm up and 1mm down on intake windows,pwk 35 A/S,UNI pod filter,br9es ngk plug,vitos 3mm stroker crank,case halfs are ported to match my transfer...

Alright guys I'm about to assemble my engine and my tranny gears are a little dirty I was wondering what could I use to clean them? can I use some carb cleaner? or soap and warter? also I'm going to be instaling my seals so I would also like to know is there any special type of assembly lube to...

Alright well hears what I need to know guys,I would like to know the compression ratio I'll be running? I'll tell you what I'm running vitos 240 with forged piston ported cylinder the exhaust is ported 2mm and a 3mm stroker crank,the reason I would like to know is because of fuel octane,so if...

guys wile I'm hear I should just ask lol,I was port matching my case halfs with my cylinders transfer ports and cleaning them up for flow and I seen something on a porting site and I can't quite remember witch one it was lol but it was about porting the cases well how do I put this well you know...

Hey fellas well today I was looking thrue my cometic gaskets and there is no center case gasket? I suppose I need some sort of liquid gasket right? If so should I just use yamabond? and do I apply it to the center case? or just certain spots of the case half,and what type of yamabond should i...

Hey guys if any of you need a case splitter tool hit me up,I make them based on the Honda model and there much better then tusk,I can do it for $35 shipped depending on where you are,I'll get some pics up later for you guys.

Well I was taking apart my spare lower end today and I fount something crazy,it has a chunk missing in the left side case right in the crank area,well hears what caused it,it was the engine balancer yes that right the balancer lol,it has some of the engine block aluminum on it where it hit and...

Hey fellows I have a question,I took off my clutch cover today and started to take apart everything to get ready to install the crank and I found that the gear and the clutch basket have play and I can twist them,now I know many of you know what I'm talking about,what I need to know is how to...

Hey there fellas,well about two weeks ago I got my lil sister's blasty porting done,so now I've decided to port my own vitos bbk now hear is what I need to know is should I port the piston? and what should I port? like intake windows or that little notch on the top right around the exhaust? now...