Search results

  1. Antec1200X

    my big bore banshee build

    id invest in another bike but building bigbore banshee's gets expencive
  2. Antec1200X

    my big bore banshee build

    build 2 fast motors.need to keep one as a spare.never again will i have to wait 3-4 months to go riding
  3. Antec1200X

    my big bore banshee build

    finally got my superior sleeve bigbore back after about 3 months of no riding time.its bored out to 76.5mm and i managed to get double ringed pistons.my right foot is already aching lol,the one on the right is the 10mill bored out to 72.5mm and its gunna fly,just waiting for the crank and...
  4. Antec1200X

    my big bore banshee build

    shee's an old cylinder i can tell you that much.i have some pics before i figured even things up with epoxy,thinking JD must of been hungover when he did this port work,idk.have a look for yourselves the center piece was in a mess the otherside was worse. waiting for the epoxy to...
  5. Antec1200X

    my big bore banshee build

    picked up a 10mil superior sleeve jug,ported by jd racing 72.5mm,i just need a crank the cases are heading to hjr to be trenched.im thinking about getting it bored out.im still waiting for superior sleeve to bore out the stock stroke bigbore :-( this 10mil.it should be in a museum lol
  6. Antec1200X

    my big bore banshee build

    yup as soon as i get the jug back and all put together ill be makin good vids
  7. Antec1200X

    my big bore banshee build

    i cant at the moment,took the shee down to the river 2 months ago and shee sucked up some water makin one vforce3 reed cage explode,frying one piston.but i sent off the jug to superior sleeve last week,going to get it bored out to 77mm.lesson learned!
  8. Antec1200X

    my big bore banshee build

    some say its 100hp.but theres no way to tell without a dyno tester.alls i can say its fast and seems like im missing a gear because i hit 6th gear in a heartbeat and it still spins out in 6th
  9. Antec1200X

    my big bore banshee build

    shees all good up and running, superior sleeve big bore.76mm wiseco pistons,hotrods trued and welded stock stroke crank,straight cut gears,hinson clutch basket,38mm mikuni mmx carbs,vforce3 reeds,shearer custom made big bore inframes,+4 swing arm,+4 axle,+4 timming,15/41 sprockets,itp ss mags...
  10. Antec1200X

    Project super sleeper shee

    the black and yellow reminds me of a yellow jacket.i bet that shee stings like one to lol
  11. Antec1200X

    my big bore banshee build

    thanks guys, @buget blaster,the jug its self cost me 800+100 for shipping,i got too excited at first and put it together using my procircuit platinum pipes and i hooked up a fuel pump from a skidoo then had it running but i had a air leak and fryed one piston,lucky i didnt ruin anything...
  12. Antec1200X

    my big bore banshee build

    thanks.i have some vforce3 reeds on thier way.soon itll be play time,ill try to post a vid once i get it running
  13. Antec1200X

    my big bore banshee build

    just so some of you know i havnt given up. teaser pic
  14. Antec1200X

    my big bore banshee build

    damn lots of compression my foot is sore lol
  15. Antec1200X

    my big bore banshee build

    got the ss fired up.damn i should of bought new straight cut gears.if it wasnt for the used ones i got the bike would sound great.think i might get a new set soon and proper carbs
  16. Antec1200X

    my big bore banshee build

    and pipes.lol but i was going to use the guts out of my stock motor if it blows up but it doesnt look like thats gunna happen anytime soon the stock motor is acting like a die hard lol. i have a contact up here and he said he had a blowen motor but hes willing to give me a deal on the...
  17. Antec1200X

    my big bore banshee build

    straights are in
  18. Antec1200X

    my big bore banshee build

    thanks man.ill keep yall posted and get some vids asap
  19. Antec1200X

    Blaster Bogging

    could the pilot jet be an issue?
  20. Antec1200X

    my big bore banshee build

    shoot i traded the crank for a trued and welded hotrods stock stroke lol. but on the way i have straight cut gears.i have a better clutch cover lined up for next pay.and just need a few odds and ends then its go time.we will find out what this ss jug has i got a helmet cam on its way as well...