Is the stud it's self stripped at the nut?
Or where the stud goes in the aluminum head?
If the head put a helicoil in it
That's coming along nice!
You should be able to drive around his azz
Lean pilot out a size and reset air screw. To take care of rich running on the low end.
Should have ported the cylinder.that would really make the...
The needle and needle seat are wrong.way lean
Slide also i believe
Could see if jets could be found?
Probably not the best place to post your question. But with the lid off the stock pilot should work. Air screw adjustment may be necessary and...
You can fix the leaking gaskets as that is its
It woll not help with the quad not moving.
Sounds like a fryed clutch. Or something...
Those carbs should come with a topend kit and crank.
If run long enough you will probably need both
Tors delete won't harm anything.
Incorrect jetting/ air leaks will fry a topend.
This is an older thread. If you start your own you may get more replies.
Assuming stock carb?
Float high set correctly
32.5 pilot jet
Was it off when you filled it?
To make sure none got in intake track
They have surveillance cameras there?
Prices are alot higher around here than they were 2 yrs ago
Some can be plugged with a rubber cap.?
Not sure what yours looks like.
Oem one from rockymountainatvmc is $28
Yamabond 4 is good stuff
How's the piston look? Cast pistons have been known for piston skirts breaking from excessive piston to cylinder clearance.
The pieces get caught...
Make sure shift star is turn so it alines with notches in the case. Otherwise it Will hit case. And halves won't go together.
If crank was left in...
Separate names with a comma.