New to blasters, jjst bought 2002 for my son, full fmf pipe, compression is good but seems doggy??

ANY SUGGESTIONS HELPFULL, CARB, air, jets... anything would help

  • Jets

    Votes: 0 0.0%
  • Tors

    Votes: 0 0.0%

  • Total voters
    0

Hill

New Member
Aug 15, 2021
7
2
24
42
New to blasters, jjst bought 2002 for my son, full fmf pipe, compression is good but seems doggy?? Jist need some easy starting points or tips thank you
 
Check/set float height, stock 32.5 pilot jet, tune airscrew for highest idle, stock needle on stock middle clip setting
Main jet should be in the 270-310 range, plug chop to confirm each
diy's in carb section for all of that
 
Check/set float height, stock 32.5 pilot jet, tune airscrew for highest idle, stock needle on stock middle clip setting
Main jet should be in the 270-310 range, plug chop to confirm each
diy's in carb section for all of that

Thank you very much, that helps tremendously, plug is wet never brown, heading out to tinker ln it now, just want it running snappy for my son and properly of course, its pre mix do you recomend 32:1 or leaner or richer?
 
  • Like
Reactions: Awk08
Any and all advice is welcome, aNd Ppreciated, been running 4 strokes for years and years now and i must be getting older because i seem to have forgotten a ton on 2 strokes!
 
its pre mix do you recomend 32:1 or leaner or richer?

Yes, 32:1 is what these air cooled engines like, and is what all jetting info on here is based on
 
Thank you, and have it running near perfect thank you for help, coil was going bad or should say basically was bad doing ignition and stater soon, may have to bug you more... sorry! Lol
 
  • Like
Reactions: Awk08