The Tavern - Your Chatter Feed

https://www.facebook.com/marketplace/item/124401989681371/?ref=search&referral_code=marketplace_search&referral_story_type=post&tracking=browse_serp:e228873d-db68-4cf3-a193-31353adffd78

1st blaster I seen for sale over here in a couple of months.

upload_2021-5-8_10-43-17.png
 
Nice.
They in pretty good shape?

Unfortunately not the best, one is an 03 with decent brakes lol, the others are a 02 and 96, the 96 had some decent stuff with it as well as the 03, the 02 was just a roller but it had a fmf fatty and was mostly complete and not too beat up.

Have some decent parts laying around, 2 wiseco cranks, 1 wiseco piston kit , 1 wsm piston kit, 2 full fmf fattys with powercore 2's , a new toomey on the way, bumpers grab bars , cut oem head , ported oem stock cyl , stock carbs with tors delete/idle added.

one is going to be stock bore stroke with cut head, ported cyl, reed spacer, with toomey, and gearing.

One will be stock bore stroke with wsm piston and fmf fatty,

The other I'm building for my bro, will be wiseco piston stock bore stroke with some reeds and full fmf , not looking to build screamers, but have a few somewhat stock and my ( toy) of one lol.
 
Sounds good.
When's the next build/ ride report:)

haven't ran his much, finished up an 02 with a wsm std piston, wiseco bearings,crank, wrist pin bearing, tusk gaskets and seals, clutch oiling mod, shift star mod , fmf fatty powercore2 with tors delete idle adjust added, stock pilot and needle with a 290 main no lid, it needs a new filter waiting on it and a rear brake cable, but shes broke in and runs well for cast