Trx400 back wheel fitment on a blaster

I wanted to say "not without the honda hubs" as I'm seeing honda bolt pattern as 4x110 and our blasters are 4x100
but a quick search turned up these threads about honda hubs not fitting the spline on a blaster axle, and drilling new holes in the honda rims to fit our hubs.
this would need to be very precise, and the thread mentions a printable template to do so, but the link is dead.
https://www.blasterforum.com/threads/will-honda-hubs-fit-on-a-blaster-axle.54222/
https://www.blasterforum.com/threads/printable-lug-pattern-templates.52784/

I also saw mention that someone makes a honda bolt pattern hub with the correct splines for a banshee axle, which is the same as our blasters
but for $200 you could buy the correct 9" blaster rims and new tires
https://www.ebay.com/itm/Lonestar-R...207890?hash=item58f9270c52:g:tRMAAOSwaEhZHeC9

a google search gets some results......

this could be used to mark and drill new holes, looks like you'd need the BLUE METRIC & SAE 4 LUG TEMPLATE98mm 100mm 108mm 110mm & 4-1/2"
bolt it onto the 4x110 honda holes and mark the 4x100 yamaha pattern to drill new holes, again.... you would need to be exactly precise ...........

https://www.amazon.com/dp/B076DJXPM7/?tag=jyj356j5-20

There are also wheel spacers that will adapt from one size to another, and you'd gain width, which is always a good thing
assuming the rims you're being offered are 4x110 ? but they make a bunch of conversions ..........

https://www.ebay.com/itm/4x100-to-4...466891?hash=item287cadf44b:g:CakAAOSwoQpcyeKI