Brakes

Topher9a · Sep 23, 2020

So picked up a blaster for my daughter. She wants to woods ride. So when trying to adjust the shorty resr break . Had the line snap. The break was frozen up. Got that fixed. No I cant adjust the the front breaks to save my life. And last issue. So one of the bolts to clutch side. Is missing bolt i looked it up just want to make sure it said 6x1mm pitch. Does that sound right. All I know is that it's got 240bigbore kit. Oil delete kit. And unit filter. Not sure if anything else is done. But in her words it's faster than her yz85. Flat track bike. Any help is much appreciated

Slydog · Sep 23, 2020

Topher9a said:
So picked up a blaster for my daughter. She wants to woods ride. So when trying to adjust the shorty resr break . Had the line snap. The break was frozen up. Got that fixed. No I cant adjust the the front breaks to save my life. And last issue. So one of the bolts to clutch side. Is missing bolt i looked it up just want to make sure it said 6x1mm pitch. Does that sound right. All I know is that it's got 240bigbore kit. Oil delete kit. And unit filter. Not sure if anything else is done. But in her words it's faster than her yz85. Flat track bike. Any help is much appreciated

Sounds like she will have a fun ride.
As for the bolt? If that is what you looked up. Or take one out and and measure the pitch.
Any shoes left for the front. Adjusters at each wheel

Topher9a · Sep 24, 2020

Slydog said:
Sounds like she will have a fun ride.
As for the bolt? If that is what you looked up. Or take one out and and measure the pitch.
Any shoes left for the front. Adjusters at each wheel

I fell li ike if I go any tighter they will snap . There is plenty of shoe left. Yiu squeez the break lever and it just keeps rolling. And waiting kn rest shorty line to come . She snapped the rear last nite

Slydog · Sep 24, 2020

Where are you adjusting at? Wheel or handle bar?
Under the front hood check the block where the cable from the bar goes in and 2 come out make sure it moves freely and is not froze up

Topher9a · Sep 25, 2020

Have try the handle bars. Under the hood. Took breaks apart . They look new. Cleaned up the drum.only way got them to kind work is took off the arm and adjusted it. But then they dont spon free. At the point just going to say screw it and go disk.

Slydog · Sep 25, 2020

Topher9a said:
Have try the handle bars. Under the hood. Took breaks apart . They look new. Cleaned up the drum.only way got them to kind work is took off the arm and adjusted it. But then they dont spon free. At the point just going to say screw it and go disk.

Are the cables moving freely thru their full range of motion? Did you check the cable block? Think you might not be getting full throw on cables?

Topher9a · Sep 25, 2020

Slydog said:
Are the cables moving freely thru their full range of motion? Did you check the cable block? Think you might not be getting full throw on cables?

Yeah and then I looked there is no adjuster at handle bars. But no shop is open near me so maken a 2hr drive 2mrw when I get out of work to get new set of bars levers bar risers

Search

Search

Brakes

Topher9a

New Member

Slydog

Active Member

Topher9a

New Member

Slydog

Active Member

Topher9a

New Member

Slydog

Active Member

Topher9a

New Member

Similar threads