The Tavern - Your Chatter Feed

Is he doing alittle mudding?
Or is he throwing a long roost:)
He's going to be eyeballing the blaster in a few years.
 
He’s already all about the blaster. He knows how to kick it and everything. I take him for rides and let him use the thumb throttle
DCEA1F17-CC5C-4E25-979A-DB876C808527.jpeg
 
Here is my latest project. The Edge Products Sidewinder. Had a vrf400 on it that last owner killed. included was a vrf750 but is way to big and heavy for it. Going to sell the 750 and get a single or twin cylinder engine for it and tidy it up a lot.

119182494_837106673492795_6377668969810983465_n.jpg


119042716_837106720159457_121956033026073652_n.jpg


119090240_837106766826119_5186112367094488782_n.jpg


119236448_837106810159448_6075010066519109979_n.jpg


has brand new sprockets and chain included, Brand new rod ends for steering and rubber loots for rack.
Need to replace rear disc and pads or caliper. And yes has front hubs and wheels included, Just not in the photos. :)

This is a photo of it I found online from years ago.
119059987_837199906816805_2424496878032896372_n.jpg
 
  • Like
Reactions: Slydog
Is that a commonly installed motor in those?

Has been done before and Suzuki SV650 I have seen also and ducati engines.

This is a list off there site but I don't think this has been updated in years,
Trailbike or motocross Motors, single cylinder from 350cc up to 650cc
KLX650 Kawasaki
KLR650 Kawasaki
KLR600 Kawasaki
KX450F Kawasaki
DR650 Suzuki
DR600 Suzuki
XT600 Yamaha
XT500 Yamaha
SR600 Yamaha
SRX660 Yamaha
WR450F Yamaha
660 Yamaha Raptor
XL600 Honda
XR600 Honda
XR650 Honda
NX650 Honda
FT500 Honda
CR450F Honda
690 KTM Enduro
 
Dam thats a pretty big list of options they have for engines to install.
Gives you alot of choices to build the way you want
 
Dam that's a pretty big list of options they have for engines to install.
Gives you a lot of choices to build the way you want

Yeah custom is your friend. :)

Mine is a series 1 Sidewinder one of there 1st designs, and soon to be a Frankenstein one. I am replacing all the rear swing arm axle setup for the later model setup that extends swing arm 58mm. Axle 100mm wider. Also design is different. Front end I also looking at upgrading. Replacing the old shortened mini rack with a 2/3 turn lock-to-lock rack. Pedals also getting upgrade.

CNC cut one i did for testing and fitment.
119661175_842661386270657_2590102389904152944_n.jpg


This is the later model version of the swing arm.
0000464_the-sidewinder_1_1024x1024.jpg
 
  • Like
Reactions: Slydog