Carburetor!!

Enzo

Member
Jul 31, 2019
33
8
44
41
6CB17BB4-E12D-4DC4-BEA6-27D86E01C823.jpeg
331ED1BF-94CB-4BF8-A848-F45553CF2309.jpeg
906CF020-C5D0-483A-8CBD-3DD2A27CB2AB.jpeg
6F93E6B7-EEB4-4EAB-9C04-8E4559570AF0.jpeg
906CF020-C5D0-483A-8CBD-3DD2A27CB2AB.jpeg
I have a carb I’m wondering if I should get rid and start from scratch. A couple things going on. First is whoever I go fast for however long and begin to slow down the four wheeler wants to stall. It will not idle on its own. I have to keep giving it gas to keep it running. The choke won’t stay out without me holding it out. The idle screw has been stripped and the place where that idle screw was is now filled in with some black stuff. The tors wiring is cut on one end and on the end disconnected. Here are pictures. Thanks for any help!
 
What jets are in that carb? And needle #
It could very well be a Chinese knock off.
 
Pretty crazy What they are getting away with. People think they are buying a quality piece and really just getting ripped off and buying a low quality fake. They have burnt down alot of motors
yeah that's crazy..and super lame. wonder why mikuni hasn't put an end to it. can u re-jet the fakes to a proper setting and make them work or is there no hope?