First Blaster 1990

mostdope97 · Jun 27, 2020

I’ve tried everything, now I guess only option is to cut it.

mostdope97 · Jun 27, 2020

I’ve tried everything, now I guess only option is to cut it.

JoeJoeSX · Jun 28, 2020

I had to heat mine then knocked it out

Slydog · Jun 28, 2020

mostdope97 said:
I’ve tried everything, now I guess only option is to cut it.

Then start cutting. Bolts junk anyway It has to come off. Order you new swinger bearings n bushings , pivot bolt and nut. Water proof grease!!!!! and whatever else you think you may need.

mostdope97 · Jul 7, 2020

Finally got the SOB just bought a sawzaul today, getting the bottom end to the shop tomorrow! Finally.

mostdope97 · Jul 13, 2020

I think I got a machine that has been neglected lol no tlc anywhere, here’s my new problem! Also is my axle suppose to move a little bit within the swing arm? I got her soaking up pb blaster now.

JoeJoeSX · Jul 13, 2020

mostdope97 said:
I think I got a machine that has been neglected lol no tlc anywhere, here’s my new problem! Also is my axle suppose to move a little bit within the swing arm? I got her soaking up pb blaster now.

Sounds like axle bearings worn.

Slydog · Jul 13, 2020

Agreed sounds like the axle bearings. Also make sure the 2 big nuts on sprocket side are not loose.
If your swinger pivot. Bolt came out that hard. You may have the same issue getting axle out also if no grease was used.could be rusted in also
Water proof grease is your friend. For next time you take it apart

mostdope97 · Jul 15, 2020

What do you think about painting it with enamel?

Slydog · Jul 15, 2020

mostdope97 said:
What do you think about painting it with enamel?

The swingarm? If so why not. It's already off. Just do whatever work needs to be done on it first. Bearings ect. Paint it.there may be more durable paints ?

mostdope97 · Jul 15, 2020

Slow process...

mostdope97 · Jul 15, 2020

Also looking to order parts if you could post links to them it would be appreciated. Everything I need for the swinger pivot and bearings, two I want to change the front brakes to disc if there is a kit. Shorty brake cable, four axel bearings and bushings and possibly carrier bearings I need this in tip top shape! Thanks

mostdope97 · Jul 15, 2020

Might want a banshee axel hmmm

mostdope97 · Jul 15, 2020

Parts!!

Slydog · Jul 16, 2020

mostdope97 said:
Parts!!

Looks good. Rockymountainatvmc is good and fast ussualy. Dont forget to pick up some good water proof grease.
Get up to $75. Then you get free shipping

.

mostdope97 · Jul 24, 2020

My carb might be a fake, is Kirk trusted and is this carb the stock blaster carb ?

https://www.denniskirk.com/mikuni/2...MIqaTImf7m6gIVCYbICh2C-wmzEAQYASABEgL_vfD_BwE

mostdope97 · Jul 24, 2020

Also ordered a bunch more parts. Including vforce 4 reeds.

mostdope97 · Jul 24, 2020

Arrived

Slydog · Jul 24, 2020

mostdope97 said:
My carb might be a fake, is Kirk trusted and is this carb the stock blaster carb ?

https://www.denniskirk.com/mikuni/26mm-vm-series-universal-round-slide-carburetor-vm26-606.p165141.prd/165141.sku?utm_source=google&utm_medium=csecid=6821162156&aid=76472566741&keyword=831081073363:la-831081073363&kid=831081073363&gclid=EAIaIQobChMIqaTImf7m6gIVCYbICh2C-wmzEAQYASABEgL_vfD_BwE

Kirk has been around for awhile.they are not listing it as a blaster carb. It is not the stock blaster carb. It's basically setup for a smaller motor.

mostdope97 · Jul 24, 2020

I’ll have to keep looking then thanks !! If you know any kind of carb I can use gimme a link! Don’t want used tors crap.

First Blaster 1990

Member

Member

Nobody likes the tuna here

Active Member

Member

Attachments

Member

Attachments

Nobody likes the tuna here

Active Member

Member

Active Member

Member

Attachments

Member

Member

Member

Attachments

Active Member

Member

Member

Member

Attachments

Active Member

Member

Similar threads