Blaster died while riding an wont start back....

BLAST04KO

New Member
May 9, 2020
1
0
2
34
My blaster died while riding, it acted like i turned the key off to it, i grabbed clutch an geared down an tapped throttle few time an it reved up an i let go clutch to continue riding an it started sputtering so i started tapping the throttle an it died after bout 30ft of it sputtering... when i tried kick starting it back it had no compression... started to take aparr to rebuild top end an got to sparkplug an it looked horrible so new one an cleaned the area for it, bam comprission was back so stopped there put together figured it would start back since compression was back but it still didnt start up so idk....
 

Attachments

  • 20200320_131026.jpg
    20200320_131026.jpg
    712 KB · Views: 171
Do you have a picture of the plug?what do you mean looked horrible? No compression.? You should run a compression test. Maybe pop exhaust off cylinder and look in exhaust port to see what the piston and cylinder looks like