4 pin rectifier wiring

Craigayfs200

Member
Oct 20, 2019
13
0
33
31
Hi all

Has anyone ever wired a 4 pin regulator rectifier to a blaster before I have the earth pin on the reg,rec earthed to the frame the stator is earthed to the engine my coil is wired as normal and I am using my lighting circuit wire yellow,red to send ac current to the reg,rec I can only pull 5 volts max out of the reg,rec anyone any ideas on what I'm doing wrong?

Thanks in advance
 
Pretty sure you have to float the ground to add a reg/rec, meaning to un-ground that wire at the stator and run it directly to the ground of the reg/rec
skip thru this thread and check all the tech posts...
https://www.blasterforum.com/threads/converting-to-led-lights.58577/
Thanks do I run my coil off the reg rectifier or leave that connected to ac voltage, I am only using the lighting circuit wire (yellow) to send ac to the reg/rec should j use the black and red power wire for the coil aswel? , Thanks
 
This is how I wired it
 

Attachments

  • Screenshot_2020-02-10-13-30-01-028_com.snapchat.android.png
    Screenshot_2020-02-10-13-30-01-028_com.snapchat.android.png
    379.7 KB · Views: 1,010