My 06 blaster revs high after it has been warmed up and is in neutral. It has a stock bore, aftermarket pro circuit exhaust, and what appears to be an aftermarket &n air filter. I am jetted at 270. Am I jetted too high because this happens after I have been riding for around a half hour?
Neutral high rev
- Thread starter Blasterownr
- Start date
does it slow in speed after a bit, or does it climb in rpm? What is your air screw at? Have you tried adjusting that? Have you tried adjusting the slide stop?
High (rich) jetting will NOT cause high idle.
High idle is also an indication of an air leak which WILL cause catastrofic engine failure.
therefore a leak down test is highly suggested.
High (rich) jetting will NOT cause high idle.
High idle is also an indication of an air leak which WILL cause catastrofic engine failure.
therefore a leak down test is highly suggested.
Its climbs in rpms after a while, I did a leak down test and there were no leaks.
Like Larry suggested above about the airscrew, what is it set at now ? how many tuns out from lightly seated ?
turn it in 1/4 turns at a time and see if it helps.
https://www.blasterforum.com/threads/adjusting-your-airscrew-pilot-jet.51060/
turn it in 1/4 turns at a time and see if it helps.
https://www.blasterforum.com/threads/adjusting-your-airscrew-pilot-jet.51060/
