Wiseco top end kit

I recently picked up a couple blasters not running and torn apart. There was one of those china top end kits included in the deal so I thru it together. As with may others after break in and less than an hour of mild run time it locked up. I want to do a good Wiseco rebuild. My question is ...Are the Wiseco top end kits from Ebay work doing? That would save me the time and hassle of getting the original cylinder bored.

Here is the kit I am looking at. I am wondering if that cylinder is any good?

Any other manufactures kits that are recomended?

I searched and didn't see anyone ask this before.

https://www.ebay.com/itm/Cylinder-W...amaha-Blaster-200-YFS200-1988-06/382483596821

Awk08 said:

That's the same Chi-wanese kit you already had fry, they throw a supposed "Wiseco" piston, or at least the decal in and call it that.
It is not

your best bet is a stock cylinder bored and honed to a new piston, and OEM or Cometic gaskets.
those green paper gaskets are an airleak waiting to happen.

Ken Oconnor Racing may have some decent shape cylinders and get ya set up ready to bolt on ?
Give him a call .... http://www.kenoconnorracing.com/
860-230-5003

Click to expand...

Thank you. I have several stock cylinders. Ill get with Ken and ship one out.

Tim