Need my blaster higher off the ground

Is the idle high enough to keep running otherwise?
Is it only when you do a full throttle plug chop type run?
Does it stutter any before it quits?
 
Oil injection is garbage in my opinion, I'd delete and mix gas
Also have you run a plug chop to confirm the jetting like Larry asked
 
Oil injection is NOT the problem.
Check your float height. If you still have TORS, unplug the brain if pre 03, if 03+ search how to. Make sure you have the main jet slosh baffle in place. Might try tweaking the idle air screw a hair.
 
Yes it is not the problem but is still crap.. get rid of it , get rid of tors and get an idle screw kit , my guess is the air screw as well
 
Idles are very sensitive on these and take allot to get right also temps can even fluctuate them so adjusting idle and air screw is always good to get best bang out of it
 
Does the bike restart after cause if not it's prob flooded and you float also like he stated it's hard to tell from the description you are giving us
 
Yes it is not the problem but is still crap.. get rid of it , get rid of tors and get an idle screw kit , my guess is the air screw as well

FALSE INFO
A quick search will prove that 99.9% of failure is OPERATOR error. Lack of cleaning resi before filling. Not keeping tank full. Improper bleeding. Not bleeding after EXTENDED rollover.

You obviously have never seen posts by JoeAK47, or Best.
https://www.blasterforum.com/threads/yamaha-blaster-froze-up-seized-i-believe.65757/#post-800011
https://www.blasterforum.com/thread...ube-oil-injection-why-because-it-works.51335/
https://www.blasterforum.com/threads/why-32-1.49688/page-2#post-627727
https://www.blasterforum.com/threads/why-block-oil-injector.38796/#post-484352

The rest https://www.blasterforum.com/search/14660928/?q=Oil+injection&o=date&c[user][0]=11216

Joe AK-47 https://www.blasterforum.com/search/14661136/?q=Oil+injection&o=date&c[user][0]=16780

Dollar says you don't look
 
You'll say "But I have a bigger carb" If you have the ability to modify a engine, you can modify a carb with an injection nipple.
Motorcycle manufacturers have been using injection since the mid 60s.
Sleds too, and still do.
 
I'm not hear to argue man if you want an bottle of oil hanging off that back of your bike that's your choice in my "Opinion" it's just one more thing to mess your bike up and who wants the extra bull of taking care of it
Also I love the smell of mixed gas then again maybe I been smelling it to much hahahaha jk
 
Gentlemen I was riding some trails and my bike started putting then wouldn’t start took the carb apart and cleaned it now it’s flooding