2005 blaster rear axle bent, HELP!!

kbbrown123

Member
Mar 17, 2009
18
0
32
Henry County GA
Hello everyone. It's been quite a few years since I've been on the blaster forum! I recently purchased a 2005 blaster. It definitely needs some TLC but I got it to just play around with on my parents land. Forgive me if this should be posted elsewhere, I've searched as much as I can and all I find are old posts regarding axles.

My rear axle has a nice little bend in it. I want the least expensive fix such as a USED STOCK AXLE that anyone may have laying around. Everything I see on eBay is 88-02, nothing 03-06. I've also read a lot about banshee axles bolting right up. Does the year of the shee matter, will I also need the brake hub to make it work on my 05 blaster. This forum is a godsend and again if I'm posting in the wrong place, I apologize.
 
any year banshee axle after ..... I want to say 1990+ you should be safe
all the brake parts are interchangeable, so you're 03+ brake hub/disc will work with a shee axle
 
any year banshee axle after ..... I want to say 1990+ you should be safe
all the brake parts are interchangeable, so you're 03+ brake hub/disc will work with a shee axle
Thanks for the reply. Where at on the forum might I find a used stock axle? But with the banshee option is it more beneficial, and I'd be able to install with everything from my old axle correct, no new hardware or other parts needed besides axle? No problems with my old carrier and bearings fitting the sheet axle. Thanks for help, those are easy to find compared to blaster axles.