First blaster

Jennings543

Member
Feb 16, 2017
18
18
44
35
IMG_20170312_124219.jpg
IMG_20170223_211948.jpg
IMG_20170308_205621.jpg
This is my first blaster I've ever had also the first frame off rebuild.
IMG_20170312_124219.jpg
 
Last edited:
Looking good.
That LT 80 is a great quad, first one my son had.
Defently was a great quad I sold the lt50 and bought a ltz50 cause it's 4 stroke I hate that I did that cause it's hard to find parts at a decent price for the ltz50.
 
Hear is the finished photo but i can't get it to rev up I've cleaned the carb,cleaned the gas tank and petcock.its already was tors deleted but I went threw all the wires from the diagram on here. I'm at a loss on what else to do I hadn't done a compression test or a leak down test yet.i rebuilt the topend before I tore it apart and it ran fine I did the heat cycle on it. Everything is stock.
zcamera-20170409_215006.jpg
 
  • Like
Reactions: Markblaster
Clip the parking brake wire on the back.

Under the seat behind the brake light you'll see a set of wires from the CDI. Theres a green/Yellow wire. Cut it, and wrap it in electrical tape to keep it from touching or grounding out.
 
I'll grab a picture in the morning of what to clip. I'm too lazy to walk from my room into the garage. It's 9:17 here and past my bed time. 4:00 A.M come way to fast.
 
Hear is the finished photo but i can't get it to rev up I've cleaned the carb,cleaned the gas tank and petcock.its already was tors deleted but I went threw all the wires from the diagram on here. I'm at a loss on what else to do I hadn't done a compression test or a leak down test yet.i rebuilt the topend before I tore it apart and it ran fine I did the heat cycle on it. Everything is stock.View attachment 30390

not finished pic yet
i don't see a silencer?:)
 
Lol it's on there it's a stock silencer I hadn't ordered my new head pipe and silencer yet just been really busy with work.