Possible partout of MX blaster

goodman24x

Member
May 2, 2010
473
9
54
West Central Florida
May start parting this out. I will make a decision in a week or so. Post up what you may be interested in, this will help me make the decision. Obviously I would like to sell motors first.
Motor in quad $900,
new unused motor $1100
ChassisIncFab +4+1 arms with yfz hubs/spindles/rotor/calipers/chromoly tie rods, all FK spherical heims in arms and rods, and streamline stainless double brake lines and brake assy w/master cylinder just bolt it all up for $900
Burgard +2 MX swingarm w/dual row lonestar carrier & all new pivot works bearing in the carrier and swinger mount end $500
ELKA Stage 4 front/rear shocks just rebuilt $1000
Power pros right bend pipe with shortened FMF silencer billet connector $200
GForce/Tusk axle with all spacers $150 it is like new only 1hr ride time on it
REAL keihin PWk33 carb jetted for motor $100
VFORCE reeds with spacer plate and boot $125
Streamline stabilizer like new $80
CFM airbox with boot tube for 33mm carb and CFM air scoops $100
Pro Aluminum Pro peg nerfs with heel guards $100

If these things get interest I will price out the small stuff later.
I will get shipping quotes for serious interest. The motors will be heavy and I will ship them in a way they won't be damaged.
 
Last edited:
One of my favorite videos all time. The blaster he battled with and won was a full blown MX ported CT motor. It had PVL and every possible thing done to it. My blaster is built right and will win! It will be a shame to part this beauty out!
 
Last edited by a moderator:
I would take the nerf, pipe and CFM airbox if you do.

Sorry about the hard times... its a shame you never get what you put into them...
 
Last edited:
why you parting out?
I really don't want to but I have to much into this quad to sell it for nothing. I am not 100% sure on partout yet. I am throwing it out there. If I get enough committed buyers then I will disassemble and part out. It will be a sad day to take her apart and just as sad to see it go. Lots of good memories and a lot of sweat equity in this beauty.
 
Add me to the list for the nerfs. What steering stem and or bars/ riser?? Do you still have that boyesen rad valve? If so pm me..
 
I am willing to wait a couple months if someone wants the quad as a whole but I would need a guarantee because I am getting PM's about the partout with some commitments.

Both engines are built identically. Airsal Cylinders, heads cut down must run race fuel, vitos stuffer cranks stock stroke, wiseco piston in both, MX porting by RTR Performance(Rick has over 30yrs specializing in 2 stroke porting), all new seals and gaskets, all new bearings. New motor has new driveline performance clutch and the motor in quad has a new driveline HD clutch. The springs are MUCH stiffer. I would take it out for a trail quad. I have the old springs and driveline plates will include free. I would probably change every other spring.
I am willing to package an engine with jetted carb, boot & reeds together. Won't be a price break. My stuff is in excellent shape and worth my asking price.
 
Add me to the list for the nerfs. What steering stem and or bars/ riser?? Do you still have that boyesen rad valve? If so pm me..
****CORRECTION****Herpderplol has dibs on nerfs if partout goes through.
I have stock stem with Rox risers with TAG bars CR Low bend with new OURY grips.
I would sell bars, risers, stem and quick adjust MSR clutch lever with clutch cable for $180

Again I am still not 100% committed to a part out until I get commitments on engines and suspension.

Whoever calls dibs here first gets the part unless it is on carb/reeds/boot due to someone wanting to pay for engine with those attached.
Gawd I hate the idea of taking this thing apart. Someone has to know somebody who has a kid who wants to win some MX races.:(

No on the rad valve
 
Last edited:
As of right now, if partout goes through:
Herpderplol: pipe, CFM airbox and nerfs
Jus_me: 2nd on nerfs if herpderplol backs out
1-5-14
Deck pen has 2nd dibs on pipe if herpderplol backs out
 
Last edited:
Some package or bundling ideas:
$2500 for total roller minus engine, carb, airbox
$850 Swinger complete with rear shock
$700 Front shocks only
$400 rear shock only
$1600 Full front suspension package(shocks, a-arms, tie rods, yfz hubs/spindles/rotors assy, brake lines, brake lever with reservoir) I will throw in extra new FK spherical heim joint worth over $60 and one new heim minus stud cost me $40 and any extra arm bearings I may have

Remember don't be afraid to PM me reasonable offers for anything I have listed, worse I can do is say no.
Thanks
 
As of right now, if partout goes through:
Herpderplol: pipe, CFM airbox and nerfs
Jus_me: 2nd on nerfs if herpderplol backs out
as of 1-5-14 Deck pen has 2nd dibs on pipe if herpderplol backs out

__________________
 
Last edited:
As of right now, if partout goes through:
Herpderplol: pipe, CFM airbox and nerfs
Jus_me: 2nd on nerfs if herpderplol backs out
1-5-14
Deck pen has 2nd dibs on pipe if herpderplol backs out
1-6-14
NickC88 has dibs on axle
__________________

Just wondering, what do the dates mean that you added?

Im still interested in all 3, just waiting for you :p
 
Just wondering, what do the dates mean that you added?

Im still interested in all 3, just waiting for you :p
It just means the name below the date confirmed to me on that date. I am getting PMs also. I have asked everyone to post here which makes it clearer but since some have not then it tells me they may not be serious. I have one member who has expressed interest in an engine and front suspension. If those come through I will begin teardown. Sorry to drag this out. I will understand if anyone says forget it later.
 
As of right now, if partout goes through:
Herpderplol: pipe, CFM airbox and nerfs

Jus_me: 2nd on nerfs if herpderplol backs out

as of 1-5-14 Deck pen has 2nd dibs on pipe if herpderplol backs out

As of 1-12-14 bigd451 has dibs on keihin PWk33, Streamline stabilizer, CFM airbox with boot tube, Pro Aluminum Pro peg nerfs, vforce3 reeds, tusk axle. Of course only if herpderplol and jus_me back out
 
Still no takers on motors. The member who was interested in the front suspension and possibly a motor has never responded again so I guess he is out. Sorry guys. I will understand if anyone backs out. I wish someone would just buy the quad and I would part out the last engine.