fmf powercore 2

Aug 22, 2010
111
0
42
ROC ny
just picked up a powercore 2 silencer and fatty header for 60 bucks. i have a stocker on there now with the stock hardware. what will i need to buy to bolt this up
 

Attachments

  • photo(2).JPG
    photo(2).JPG
    34.7 KB · Views: 147
  • photo(3).JPG
    photo(3).JPG
    34 KB · Views: 161
A flange, 2 springs and a selection of main jets from #260 to #300, and a handful of b8es spark plugs.

FMF recommend #260.

Premix at 32:1 add 1 size.

Airbox lid off, add 1 - 2 sizes.

Better flowing air filter, add 1 size.

Plug chop to confirm jetting.
 
i actually made myown. flat piece of steel one like 2in hole in the middle and two bolt holes on the sides. butt weld a 2in pipe to it and shes made
 
well i went to bolt the silencer on and found out its a powercore 1. where it bolts to the grab bar on the side, there is like a 3 in gap in between the grab bar and mount, like it needs a spacer sleeve or something for it to fit. can anyone post a pick of where my problem is and how it bolts up or is there supposed to be a spacer?