Recent content by TexasTiger01

  1. T

    Carb driving me crazy....

    Thanks for the help guys. I got it running now with a .290 main.
  2. T

    Carb driving me crazy....

    Plug had about an hour run time on it. I just ordered a pile of plugs I put a .290 main jet in it yesterday. The bike lags midrange and doesn’t like WOT. 3/4 throttle and it performs fairly well. Would a .35 pilot help the low/midrange performance? Thanks again for all of the help!!!
  3. T

    Carb driving me crazy....

    Thanks man, probably do a new top end in the near future.. Maybe a big bore kit. .230 main jet is what is in it now, that's what it had in it when I bought it with mods. This is what the plug looked like after I did a pull. LEAN :eek::eek: The smallest jet in my jet kit is a .340. Any...
  4. T

    Carb driving me crazy....

    Thanks!!!!! The needle jet was dirty, cleaned it and verified the float and she is running as good as when I bought her. (which is still not great IMO) My son is stoked!! My next question; in your opinion is my .230 main jet too small. I have deleted oil injection, FMF Gold Pipe, and Airbox lid...
  5. T

    Carb driving me crazy....

    Ok, I verified the needle to be a #5J22. It is set on the third notch. Verified the original main jet to be .230, not a .200 as stated before. ( been dealing with may to many jet sizes in the past weeks lol). Compression is 100PSI. It cranks first kick and performs well in low range, as soon...
  6. T

    Carb driving me crazy....

    Hey guys, Long time reader, first time poster looking fro some advice. I bought my son a 2001 Blaster for Christmas. FMF gold pipe and air box lid delete. It ran ok besides the carb leaking. SOOO, I rebuilt the stock carb (.230 main jet) and finally got the float set to stop the overflow leak...
  7. T

    Carb driving me crazy....

    Hey guys, Long time reader, first time poster looking fro some advice. I bought my son a 2001 Blaster for Christmas. FMF gold pipe and air box lid delete. It ran ok besides the carb leaking. SOOO, I rebuilt the stock carb (.230 main jet) and finally got the float set to stop the overflow...