Recent content by T7561

Hi I was riding my blaster about 6 months ago and suddenly it died. Anyway after 3 months of it sitting there I decided to let a friend look at it to repair it. Long story short he found some kind of key way broken. He replaced it I put it back together and it started up fine. I replaced the...

I believe current is standard 66mm. But I have got to check so I was going to go 67mm with a nice port and polish and a rejet. Currently running pro circuit exhaust, boysen dual reeds and a uni twin air filter

By head mod. You don’t mean the mod Ken does do you ? I was simply gonna get The head polished and a bigger piston as it’s the fastest cheapest option

Thanks for the reply mate. What do I need to do extra to actually make it gain power... I see vitos do a a big bore Kit... if I upgrade piston size to 67mm get my head port and polished and then my carb rejetted will I notice some small power gains ?

okay it won’t let me upload the photo but there is like 4 earths into one going to the rear light

So I recently fitted a brake light back onto my blaster as previous owner kicked it off and didn’t need it. Used a Lucas style 12v 2 filament bulb style no LED. Wired it up and I can either get a bright tail light (which should be brake light) and when brakes applied all lights go out. Or I can...

I recently bought a 2004 blaster. Wasn’t in a bad state but when I serviced it you could tell it hadnt been done in a while. I was gonna replace the reeds with the boysen power reeds. It’s a simple job I know but once I fit these will anything else need adjusting or should the quad still run...

Hello New to owning a blaster. I believe the full ratio is 32:1. I am from the UK so we measure in litres. Not sure what it’s like around the world. So 1 litre of oil to 32 litres of fuel ? sound correct ?

I believe my current bore is standard. But are you saying this Incase it’s been bored already ?

Sounds good thank you This was the kit I was going to go for https://www.quadbikeswales.co.uk/yamaha-yfs200-blaster-88-06-wiseco-piston-kit-oversize-1-00mm-bore.html

Thanks for the reply it’s much appreciated. In terms of stroke should nothing change using the wiseco piston ? Someone said I need to make sure it doesn’t change the stroke because I could have issues

Hello. New to owning a blaster also new to forums. I’m from the UK and I’ve noticed it is much harder to get parts for Blasters. I would like to do an engine rebuild for piece of mind but I would like to use the wiseco oversize piston. I know I will need to get the cylinder bored but is there...

Hello. New to owning a blaster also new to forums. I’m from the UK and I’ve noticed it is much harder to get parts for Blasters. I would like to do an engine rebuild for piece of mind but I would like to use the wiseco oversize piston. I know I will need to get the cylinder bored but is there...