Recent content by fastyblasty

  1. fastyblasty

    some 2010 racing pics

    kinda fooled me too but thats a raptor 350
  2. fastyblasty

    My +9 extended Blaster pics

    i have a +5 extended on mine and it works just fine on trails and the track ive just gotta stiffen up the rear shock a little but it works good with the 240bbk +3mm stroker Vforce reeds and my fmf setup real nice really helps keep that front end down
  3. fastyblasty

    flat track

    mine used to be a flat tracker all the guy did before me was weld extra mounts to make the shocks lower on the a arms and swingarm i have a swingarm with a strong mount on it that makes the quad as low as it can go i will post pictures if you want but let me know
  4. fastyblasty

    Best Exhaust System for Blasters

    ive got an fmf setup on my 240 stroker with Vforce and its sounds good and i dont think i could want anything better but with f7 or toomey whats the difference in power?
  5. fastyblasty

    125 Blaster

    torque does not matter if you have the right sproket combination usualy a bike will do 70 but for a ditchhopper like you were saying i think it would be a pretty sweet machine
  6. fastyblasty

    spencerport,ny

    anyone know good places to ride around here? i know some powerline trails but theres no telling how much more there could be
  7. fastyblasty

    Vito's 240 Big Bore Kit

    I have the vitos +3mm stroker and the big bore on mine now and i havent had any problems but before i got the stroker the crank bearings took half as long to wear out so just go spend the extra 190$ and get the sroker kit it will save you alot of stress
  8. fastyblasty

    200 vs. 240cc

    not that any of this is true but on the magazines it says gain up to 29hp which with many more mods this is possible but i dont know maybe
  9. fastyblasty

    crank seal

    i put my crank seal in with the spring side facing out and it is reving very high and ive checked everything else that might cause this do i have to replace the seal and if i do is there a way to take it out and flip it without buying a new one? let me know thanks
  10. fastyblasty

    Kick Starter broke???

    i did this and when i bend it around and clip it in as soon as i let it go it stays but it clicks a couple times and the tension is really low and the actual gear does not engage to the idle gear i dont know i just rebuilt it from the bottom up and it prob has something to do with the way i put...
  11. fastyblasty

    V-force 3 reeds

    i rebuilt my blaster and i think i might have put my reeds in upside down does it matter?
  12. fastyblasty

    Comment by 'fastyblasty' in media 'P5150024'

    yea that would be a yfz450
  13. fastyblasty

    Swing are cracked, need help.

    you can weld it however it will probably not last long i wished you lived closer to ny i have 2 swingarms just sitting around i would give away but yeah your better off buying one they really cant be much
  14. fastyblasty

    my 01 blaster build

    you can do the dame thing with the clutch side cover it takes a while with sandpaper but its worth it all day long looks great
  15. fastyblasty

    oil in stator case

    i just put new crank seals in my blaster and found when i went to kick it over oil started leaking from the stator cover took the cover off found that my crank seal was in about 2mm in maybe too much idk would this affect oil going in there? and if so how do i pull the crank seal out a little?