Recent content by Daddy_Blasty

  1. Daddy_Blasty

    why did my piston blow

    no never leak down tested
  2. Daddy_Blasty

    why did my piston blow

    Just put a new piston and jug maybe a month or two ago has a pro circuit pipe its jetted at 280 and usually ran in heat so idk how it could of went lean in running vforce. I do tho have a slight feeling that it was the cheep chinese jug and piston that was purchased? anything?
  3. Daddy_Blasty

    why did my piston blow

    i was cruisingin 5 not wide open just goin and bang torn the engine apart and the spart plug broke and the top of the piston is fried all white and metal shaving whyd this happen oil injection running way to lean it seemed to run fine before it all happened at once
  4. Daddy_Blasty

    Blown motor and Moves in gear

    I was recently riding my 03 blaster down the road i hit 5th then all of a sudden i heard a bang and my engine cut out and i just rolled to a stop i took the jug off and first thing to notice was the spark plug covered on metal a closer look at the piston revels it over heated and just blew a...
  5. Daddy_Blasty

    Leaking out overflow

    The quad is running good "i hope" for some odd reason gas seems to be leaking out of the overflow every time i drift or wheelie i dont know if thats what it is suppose to do or.... pls help
  6. Daddy_Blasty

    Leaking out overflow

    The quad is running good "i hope" for some odd reason gas seems to be leaking out of the overflow every time i drift or wheelie i dont know if thats what it is suppose to do or.... pls help
  7. Daddy_Blasty

    Too rich

    problem solved sticky floats and bad air filter
  8. Daddy_Blasty

    Too rich

    quad in motion give it more then 3/4 bogs down which means running rich turned the gas off and the quad ran fine turned it on repeated and bogged down again what is the problem.
  9. Daddy_Blasty

    Not reving high.

    Got an 04 blaster off craiglist and it seemed to be running great only problem was it was reving to high turns out it was just the throttle cable was tangle the quad ran great for about a week then the piston blew. I bought a "cheap" top end kit from ebay that included a new jug and filter we...
  10. Daddy_Blasty

    Shifting Problem

    should this be something i need to worry about and fix immediately or can i ride it out for the summer and fix it in winter
  11. Daddy_Blasty

    Shifting Problem

    I recently bought a 04 blaster and it seems to run great only problem i have is it smashes into 1st gear really hard another problem is getting it into first every gear is fine its just trying to drop it back down into 1st it takes like 4 or 5 pushes amy help?
  12. Daddy_Blasty

    Revs to high and takes forever to come back down

    problem solved the throttle cable was out of place
  13. Daddy_Blasty

    Revs to high and takes forever to come back down

    i cleaned the carb out today and it seems to sound a lot better i adjusted the air mix screw but when givin throttle takes time to come down again
  14. Daddy_Blasty

    Revs to high and takes forever to come back down

    I recently just bought a 04 blaster with vforce 3 reeds and tors eliminator the problem i seem to be having is when im in nuetral and go to give it a little gas it revs really high and takes forever to comeback down any help on fixing this
  15. Daddy_Blasty

    Time for an update

    easily the funniest post ive seen yet