Media added by joeak47

Navigation

  1. Yamaha Blasters 138
  2. Builds and Projects 60
  3. Parts and Accessories 21
  4. Racing 10
  5. ATV Trails 9
  6. Other ATVs 11
  7. Miscellaneous 18
    1. Auto 3
    2. Business 0
    3. Entertainment 1
    4. Home & Recreation 2
    5. In the News 0
    6. Technology 0
Browse albums

Media comments

Most media items

  1. Awk08
    103

    Awk08

  2. lasxgames
    100

    lasxgames

  3. joeak47
    98

    joeak47

  4. Blaster200boy
    93

    Blaster200boy

  5. Jonesee20
    92

    Jonesee20

Media statistics

Categories
13
Albums
1,461
Uploaded media
7,591
Embedded media
26
Comments
1,006
Disk usage
1.3 GB
Here's an inside view looking out toward the reed cage.

Here's an inside view looking out toward the reed cage.

  • 2
  • 0
Here's a side profile with reed cage and piston.

Here's a side profile with reed cage and piston.

  • 2
  • 0
First I "halved" it,then I "quartered" it!

First I "halved" it,then I "quartered" it!

  • 1
  • 1
Cast Namura piston.

Cast Namura piston.

  • 0
  • 0
Dodge M37 Weapon Carrier

Dodge M37 Weapon Carrier

  • 0
  • 0
Dodge M37 Weapon Carrier

Dodge M37 Weapon Carrier

  • 0
  • 0
Dodge M37 Weapon Carrier

Dodge M37 Weapon Carrier

  • 0
  • 0
Another angle assembled. Flash picture.

Another angle assembled. Flash picture.

  • 1
  • 0
Assembled.

Assembled.

  • 0
  • 0
A flash picture with a pointer showing the step cut.

A flash picture with a pointer showing the step cut.

  • 1
  • 0
This kind of explains what I did (short form) and a flash picture.

This kind of explains what I did (short form) and a flash picture.

  • 0
  • 0
Here's another good picture (no flash) the shows the two components and the step cut.

Here's another good picture (no flash) the shows the two components and the step cut.

  • 0
  • 0
Here's a good picture (no flash) that shows the gasket setting in the cut.

Here's a good picture (no flash) that shows the gasket setting in the cut.

  • 0
  • 0
The cut step fits flush with the copper head gasket.

The cut step fits flush with the copper head gasket.

  • 1
  • 0
Here is the step cut.

Here is the step cut.

  • 1
  • 0
10 Hours on the clock! And 10 hours on the "cheap cast piston" that everybody loves to hate.

10 Hours on the clock! And 10 hours on the "cheap cast piston" that everybody loves to hate.

  • 0
  • 0
10 hours of use,and just removed from the cylinder. Nothing wiped off. First 5 hours... REDLINE OIL and oil injection. Second five hours Maxima Castor 927 mixed 20 to 1 ratio! NICE AND CLEAN!

10 hours of use,and just removed from the cylinder. Nothing wiped off. First 5 hours... REDLINE OIL and oil injection. Second five hours Maxima Castor 927 mixed 20 to 1 ratio! NICE AND CLEAN!

  • 1
  • 0
Exhaust port is nice and clean.

Exhaust port is nice and clean.

  • 0
  • 0
yamaha banshee prolite pistons

yamaha banshee prolite pistons

  • 0
  • 0
The Vito's port map over-laying the Race logic porting templates. You can see that the vito's exhaust port timing opens a bit earlier. Intakes are about the same.

The Vito's port map over-laying the Race logic porting templates. You can see that the vito's exhaust port timing opens a bit earlier. Intakes are about the same.

  • 2
  • 0
Race Logic porting teplates over-laying the Vito's 240cc port map (front view)

Race Logic porting teplates over-laying the Vito's 240cc port map (front view)

  • 1
  • 0
Race Logic porting templates over-laying the stock port map. More everywhere!

Race Logic porting templates over-laying the stock port map. More everywhere!

  • 1
  • 0
Port maps... Stock cylinder ...... top row Vito's 240 cylinder.... middle row Race Logic's porting templates... bottom row

Port maps... Stock cylinder ...... top row Vito's 240 cylinder.... middle row Race Logic's porting templates... bottom row

  • 2
  • 0
The templates up close

The templates up close

  • 0
  • 0
Top Bottom
Back