Yamaha raptor 350

Chased similar issue with a 400EX, thought it was valve adjustment. Though the valve adjustment was needed, it ended up being a fuel issue. Lean on idle. What you think is an air screw is actually a fuel screw.

Maintenance was so lacking,, it came to me needing the whole axle carrier needing replacement because the bearings worn so bad the axle wore into the carrier.
 
Chased similar issue with a 400EX, thought it was valve adjustment. Though the valve adjustment was needed, it ended up being a fuel issue. Lean on idle. What you think is an air screw is actually a fuel screw.

Maintenance was so lacking,, it came to me needing the whole axle carrier needing replacement because the bearings worn so bad the axle wore into the carrier.


Yeah I have checked it over and bearings all good and chain rollers look like stock ones. :)
Do need to adjust front end as it has a little more toe out then I think it should have. got o read up about it..
 
Went out for another ride today. Bloody hell it was hot today. Blue sky sun out 30c degrees. Sun burnt line across my wrists lol. Where gloves and top didn't cover

Ride3 2.jpg


Next time I plan on going up the other way of the river where it splits into 2.

Ride3.jpg


20171202_110740.jpg


20171202_111330.jpg


20171202_121501.jpg


20171202_121511.jpg
 
Last edited:
I think the camera is broken. Bit of sh*t only recorded 1.2 of what it should have. Taking it back to shop tomorrow. Before I throw in the bin.

2nd time its stop recording and missed recording the rabbit running side me and the dogs chasing me today.
 
Got some new handle bars and kill tether yesterday. Handle bars on sale so got them and got the kill tether to replace the broken one that was on the bike. Just need to get some new hand grips now.

DSCN5274.JPG
 
Got my kill tether installed today after drawing up a bracket and had mate CNC cut it.

20171216_132953.jpg


Bent the bracket a little to get it lower and setting in nicer place.

20171215_182829.jpg


20171216_121333.jpg


20171216_121357.jpg


Handle bars and new grips installed.
20171214_175552.jpg


20171214_175531.jpg


Next part I need to look into is case saver.
 
Good day today out on the raptor. Got wet as hell and stuck a couple of times. lol. Oh and almost ripped my head off. You will see it in the video that is coming. Gopro Hero worked perfect. 1.4 hours of recording before battery died. Set on 1080.

20171223_111022.jpg


20171223_123729.jpg


20171223_123751.jpg


20171223_131954.jpg


20171223_131957.jpg


20171223_132001.jpg


20171223_132620.jpg


20171223_135206.jpg


Ummm Anyone want a 4x4.
20171223_141536.jpg


Number plate surround I found on river bed.
20171223_155840.jpg


Gopro Hero 5 Session.
20171223_162624.jpg
 
  • Like
Reactions: speedyslyder
Maps of the 2 rides I did today. Oh I also got the quad to 101.56 KPH. Elevation is from sea level up to 606m above sea level. 25c degrees.

Ride 23 Dec 2017 Part 1.jpg


Ride 23 Dec 2017 Part 2.jpg
 
Last edited:
Picked up a 2nd gopro today. So main one on helmet and 2nd one on the quad. at moment on the flag mount on grab bar. Will move this camera around now and then to get different angles

20171226_172550.jpg
 
Went for 2 rides today on another river. 4x4 tracks. Man I hate rutted out tracks. Also just about went into a hole on side of track lol.

20171229_154618.jpg


20171229_154612.jpg


20171229_130029.jpg


20171229_130619.jpg


Ride 29 Dec 2017 Part 1.jpg


Ride 29 Dec 2017 Part 2.jpg
 
Last edited:

Uploading part 2 at moment. I fail big time on it. get stuck in mud 2 times. lol. Bike needs 4x4 and winch.
 
Last edited:
Got a Set of frame guards on there way to me for the raptor. Hoping to get out tomorrow for a ride. :cool: