easy wiring diagram for you

Yes, if you were to delete the yellow/ red wire and follow everything else that is a stripped down harness setup for kill switch only (black/ white & black). You can also remove the lighing coil from the stator if you wish to do so.

This diagram is for an 88-02 harness. An 03-06 is just slightly different.
 
  • Like
Reactions: speedyslyder
Yes, if you were to delete the yellow/ red wire and follow everything else that is a stripped down harness setup for kill switch only (black/ white & black). You can also remove the lighing coil from the stator if you wish to do so.

This diagram is for an 88-02 harness. An 03-06 is just slightly different.
Do you have the 03-06 diagram?
 
Today I made a wiring diagram in CAD for any one who needs an easy diagram to follow. It shows what connects to what. Its for wiring cdi and head light, not tors or other bs that you don't need. Shows what's needed to run. Pm me with an email for pdf of the diagram


f3x8c1.jpg
Can I bypass the yellow to to blue to the voltage reg and cut it straight out? I don't have lights or anything
 
Yes you can.
I did that an man instill have 0 fire. My stater is reading 248 ohms . But I can't find the year for my bike to order new cdi or coil! It's been painted a million times it looks like !
 
I did that an man instill have 0 fire. My stater is reading 248 ohms . But I can't find the year for my bike to order new cdi or coil! It's been painted a million times it looks like !

You don't need an exact year.
All 88-02 blasters have a 4 wire stator and are electrically identical.
03-06 blasters have a 5 wire stator.

All parts from those model years fit each other.....88 fits 02, 03 fits up to 06

Be careful with aftermarket stators, there's a few known to be junk right out of the box.
Best to buy good used stators, and a 5 wire can be made to work on a pre 03 blaster, but not the other way around.
 
You don't need an exact year.
All 88-02 blasters have a 4 wire stator and are electrically identical.
03-06 blasters have a 5 wire stator.

All parts from those model years fit each other.....88 fits 02, 03 fits up to 06

Be careful with aftermarket stators, there's a few known to be junk right out of the box.
Best to buy good used stators, and a 5 wire can be made to work on a pre 03 blaster, but not the other way around.


Coil the same thing ?
 
Coil is the same on ALL blasters
So I got a coil and still nothing.. all I can think of is that it is grounded out somewhere. I'm going to tear it all back apart and see if my grounds aren't connected correctly . The stator is reading 230ohms so it should Be firing in theory!!!