Blaster need help

beee_24

New Member
Sep 7, 2014
30
0
6
48
I have a 97 Yamaha blaster an was wondering about how u check the oil n it. I unscrew the cap but has no dip stick on it. I was goin to drain oil out an put oil n it what kind of oil an how much u put n thanks
 
takes 650ml of oil,there is a sight glass window down below rear foot brake.
what oil do you got in it know?

Well the blaster was giving to me had to do some rigging on carb got back on it cranks an was wondering about gas so I drained tank an got 2 stroke oil an mixed with gas an put n tank. Goin to get a new spark plug tomorrow. But not sure about the oil an how much to put n motor thanks
 
650ml is like 3/4 of a quart but just measure it.
get some at a dealer 10/30 atf yamalube.ect i used this but 10/30 is recommended.
is there a yamaha dealer close by you?
yamalube 1.png
 
if you drain it directly into empty bottle of oil you will be able to tell how much was in there:)
funnel old bottle.
650ml is what it takes and 1 quart is 946ml..so less then 1 quart
can be oil of your choice just no friction modifiers...a dealer should help you....not family dollar lol
 
Last edited:
650ml is like 3/4 of a quart but just measure it.
get some at a dealer 10/30 atf yamalube.ect i used this but 10/30 is recommended.
is there a yamaha dealer close by you?
View attachment 12470

No there's not one close about a hour to hour half away
if you drain it directly into empty bottle of oil you will be able to tell how much was in there:)
funnel old bottle.
650ml is what it takes and 1 quart is 946ml..so less then 1 quart
can be oil of your choice just no friction modifiers...a dealer should help you....not family dollar lol

Lol no oil from DG got it !!!! I see what I can find around n town thanks a lot for help
 
As to mixing the oil with your fuel, what oil did you use as there is 2 stroke oil and 2 stroke oil.

You should be mixing at 32:1 or better.

It must be oil designed for air cooled motorcycles, not weed whackers, chainsaws or outboard motors.

Is the oil injection system removed?
 
Last edited:
photo 1.JPG
photo 2.JPG
As to mixing the oil with your fuel, what oil did you use as there is 2 stroke oil and 2 stroke oil.

You should be mixing at 32:1 or better.

It must be oil designed for air cooled motorcycles, not weed whackers, chainsaws or outboard motors.

Is the oil injection system removed?
As to mixing the oil with your fuel, what oil did you use as there is 2 stroke oil and 2 stroke oil.

You should be mixing at 32:1 or better.

It must be oil designed for air cooled motorcycles, not weed whackers, chainsaws or outboard motors.

Is the oil injection system removed?

i just drained oil it looked more than a quart of oil but the oil looks a greyish color. fixing to go get some atv oil and put n it thanks for help
 
oil 1.png
hqdefault.jpg
measure it?
is there an oil container near rear fender/filled with 2 stroke oil?
there is also a line that connects to carb and goes into/near kickstarter side.
 
No don't have a oil container. An don't have hose running from carb over near the kickstart
 
Your probably turning the air screw. The idle screw will be under the seat on top of the tors brick, if it still has tors
 
And that tube is not supposed to run there. It comes of the bottom to drain the float bowl, the orifices on each side is an overflow