Foot pegs, wide and lowered!

79 bronco

Moderator & Self Custom Psycho
Staff member
Apr 9, 2010
5,420
774
178
47
I don"t know???????
Right now im running doubled up foot pegs, they look a little ugly!
100_7250.JPG


This is the concept peg im working on VS the stock doubled up peg.
104_8043.JPG

The over sized mount.
104_8046.JPG


To get to the back bolt i will have to get inside the peg.
104_8047.JPG
104_8059.JPG
104_8060.JPG
104_8061.JPG
104_8062.JPG
104_8057.JPG


This foot peg is just a concept and i will not be running it on my blaster.
It is 2 3/4 " wide and 1" lower! :cool:
 
Any specific reason why you decided to go back and down? Back to fit the heal guards better or a different reason?? Nice good foot pegs are hard to find for a Blaster and when you do find them they are pricey..
 
as always ....nice work doug !
very similar to the pro armor fat pegs on my nerfs
 
Any specific reason why you decided to go back and down? Back to fit the heal guards better or a different reason?? Nice good foot pegs are hard to find for a Blaster and when you do find them they are pricey..

Back so the heal guards are inline with the rear banshee fenders, just like they are with the doubled up foot pegs.
Down to see if it would give the blaster a bigger bike feel.
 
Can i see a pic of a pro armor fat peg? For ideas!

i took these yesterday even before i saw you ask :)
but i think you've got a good concept already

peg.jpg



peg2.jpg


what i don't like about these is they're integrated onto the nerf tube on the bottom, and fill up with mud with no drain holes :(
i like your design better, the more/bigger drainage holes the better, especially the way you like to MUD !
 
I was thinking my first concept peg looked a little square, so i changed it a bit.

Top is the new concept peg.
104_8076.JPG

Left is the new concept peg.
104_8077.JPG

Right is the new concept peg.
104_8078.JPG


Right is the new concept peg.
104_8079.JPG


Left is the new concept peg.
104_8080.JPG


Top is the new concept peg.
104_8081.JPG


Left is the new concept peg.
104_8082.JPG
 
nice doug, I like the new rounded off better

whats with this part ?

doug.jpg
 
I'm going to make my pegs out of stainless steel.

On the right side with the brake mount, i'm going to cut the peg off of the its mount and use it as a brake mount. Then bolt that brake mount between the new foot peg and frame.

On the left side i will have a boot guard between the foot peg and frame.