Stock wiring diagrams-

[slickerthanyou]

edit: pics enhanced by speedyslyder, to make them actually readable


88-02 4 wire stator

03+ Five wire stator

88-02 4 wire stator w/ lighting

 

[Awk08]

nice to see these packaged up in one spot, stuck like chuck !!!

 

[Portaparty]

I cant see the color codes on the 2003-05...
Also will the 4-wire stator not work on the 2003-2005 wiring?

 

[Awk08]

I cant see the color codes on the 2003-05...
Also will the 4-wire stator not work on the 2003-2005 wiring?

download the 03-06 supplement here, and find the wiring diagram in there, it'll be readable

a 5 wire stator can be used in an 88-02 4 wire harness by grounding the extra green wire of the stator to the frame.

a 4 wire stator cannot be used with a 5 wire 03+ harness

 

[Portaparty]

Thanks for the help!!!

 

[Awk08]

Thanks for the help!!!

forgot the link to the 02+ supplement above, here ya go........

http://www.blasterforum.com/general-support-17/downloadable-yamaha-blaster-manual-17325/

 

[GateCityGeneral]

I would like to rewrite my blaster because the nut case that had it spray painted everything red and the wires look bad. Can I run new wires?

 

[Awk08]

I would like to rewrite my blaster because the nut case that had it spray painted everything red and the wires look bad. Can I run new wires?

you could run new wires,
if the wiring itself is in useable shape, just painted over ?
the wires are mostly wrapped in tape,
i'd try untaping them, just clean the untaped ends with paint thinner,
then re-wrap with new electical tape.
that'll keep all the stock connectors and butt splices.

 

[speedyslyder]

if you still cant see it,or your computer,or device wont let you view the pdf blaster manual,try changing the zoom on your toolbar,they are set at 100% standard you can change it to much bigger then that to read it,''top right of screen'' tools ,zoom,on your toolbar.

 

[speedyslyder]